I need 1 sizing ling, any luck. #24669 watch #030277909

Try the following links:

http://www.watchdoctors.co.uk/calvin-klein-watch-repair.htm

or call a CK customer service at 1-866-513-0513

Or try a local watchmaker and see if its possible to have them cut the right size for you.

mcdevito75 Here, Best Bet see a small watch repair shop in your area for this adjustment to the band.

1)Unscrew the crown until it pops out, the same way you would unscrew the crown to change the time on the watch.
2)Place the watch case opener in the notches around the outside of the back of the watch case. You have to use a watch case opener made for Rolex watches to open the watch. Once the case opener is in place, twist it and the back will pop open.
3)Use a mini screwdriver to loosen a tiny screw on the inside of the watch located near the stem. You do not need to unscrew fully--only loosen it.
4)Pull the crown straight out. The crown and stem should come out easily.
To open the back of the watch
1)Purchase a Rolex watch back opener set, if you do not already have one. This set is able to open and close any size of Rolex case.
2)Match the size of your Rolex case with the same size of grooved metal die from the tool set.
3)Put the metal die on the grooves on the back of the watch case.
4)Turn the die to remove the case.
5)Remove the rubber gasket.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

i need to no how to take links out to make it smaller

the size cell that goes in this watch is a 395...good luck :)

to change the battery of fossil blue watch,just open the case back and remove the old battery,look the number size on the battery and put a new battery that same number size ,after replacing battery press the case back tight to avoid water damage !good luck

good afternoon ! you need a puncher pin to remove the pin ,just push the pin to releas and full the other side,be verry careful ! good luck !

Hi.  I just received the Tag Heuer Indy 500 with steel bracelet today for christmas from my wife.  I'm a smaller man and had to take out 3 links.  I'd never sell this watch so if you would like them...just write. [email protected]

Charles Roscow Silver Spring, MD

you need to push it thru wit a ling "needle type" toolin order to get it out. it has to be strong enough so that it doesn't bend also because it's quite stuck in there pretty good. thats part of the quality you get from a movado.

Go to a local jewelery store and buy a new band for it. You will find one you like. Joe