Hae am from Africa Kenya..my BOSS ME 25 does not produce any sound ..everything else is working only the signal to hear what you are playing... Thanks in advance for your help.. Chris k.

Question edited to make some sense :>D

https://www.google.com/search?q=Cube+Baby+and+Boss+ME-25

..

Though they all live in Africa, each species of zebra has its own home area. Plains zebras live in the treeless grasslands and woodlands of eastern and southern Africa. The Grevy's zebra lives in in the arid grasslands of Ethiopia and northern Kenya. The mountain zebra is found in South Africa, Namibia and Angola.

First and foremost , check your signal chain. By that, i mean put the pedal aside, ...just unhook it and take it out of your signal path. Using the same cables , guitar , amp, other pedals - borrow a friends MT-2 if you can get one , and try THAT to see if THAT works , OR any other kind of distortion pedal. If another one works ok , it's YOUR MT-2. Boss pedals are pretty rugged , but sometimes the little actuator (on/off switch) underneath the treadle (where you push your foot down) will become faulty. That's a high-gain pedal - are you using a basic Strat or other single-coil pickup guitar? If so , are you playing close to any flourescent lights? SIngle coils are noisy around those lights. Will cause a hum / buzz if using a heavy dist. pedal. You can check that by moving around as you play.

This is a common problem with this pedal experienced by allot of people. My best advice would be to sell it and put the money toward a real Fender tube amp and some good pickups. If you're trying to go cheap check out some Line 6 modeling stuff.

DID YOU CONNECT THE JACKS FROM THE HEAD UNIT? JUST A THOUGHT AS THIS IS EASY TO OVER LOOK

hi this Probalm is your sound Drivers check your sound drivers

Me too same problem, no audio with the XM. Do you think it has anything to do with Audio-Video out setting on the unit?

If this is the CH150, it's not bridgeable. Try connecting it normally (one speaker per channel) to see if it will produce output.

The problem is due to the design of the DELL Laptop itself. It is not dsigned to monitor the incoming signal. I bought a cheap Behringer UCA202 USB-Audio Interface. It provides for real time monitoring the incoming sound. I can also hear the accompanying music while I play along with pre-existing tracks. It's not the highest quality but it was only 25$ so well worth the price.

Look for over-heated area on PCB===change 47mf/25v cap and two xistors== BC-327-25=BC-328 BC-337-25=BC-338 This solution is offered for L04-01 chassis.