Our netflex has gone haywire, we can't go back to categories it won't work

Netflex?

if the bobbin winding has been switched back to normal sewing then there could be something wrong with the computer

If you cleared IE history/cookies, you will need to re-enter the user ID and password. It's also possible he's angry at you and changed the password!

Problem with vizio " hd-55 - "
Help to register netflex

i have netflex and my remote stopping working i changed batteries but cant find the arrow it isn't showing up at all. WHY?

The proper way to say it is Instrument Panel Electronics have gone haywire. This is not enough information for anyone to make a determination. What do you mean? It is all digital and blinks, scrolls from left to right in non-sensical jibberish, all 8's or what? You must give us something to go on.

Open the power distribution center box near the battery and remove the asd relay that should shut it down. as for the problem itself, it could be a bad relay, a bad ignition switch or some odd ball thing that needs testing to find.
Good luck!

• Hi, to Enable the Pointer Device; go to, Control Panel, click (Mouse) in the "Hardware and Sound" category. Go to; Device Settings, in the (Devices) block, click on, and Highlight; the item you want to (enable) this being the Pointer Device. Click the Enable button, just below. Be sure to (Click) on the Apply button, click OK. You may need to Update Drivers. Click on Hardware, select Properties, click, on Driver. If the, Update Driver (block) is not Grayed-out select to Update Driver, click (OK), this will ensure that the application take effect. Note: Restarting the computer will configure system changes in the computer applications to prevent errors, and to finalize the (Installing / Uninstalling) of programs, and or (Enabling / Disabling) of Hardware. "If this soluton helped, feedback is apprecited, paul7of9"
  

SOME GAS CAPS CAN BE VERY HARD TO REMOVE , IF YOU TRY WITH A PAIR OF LONG PLIERS YOU SHOULD BE ABLE TO REMOVE. THE TACH PROBLEM SOUNDS LIKE THE SPEED SENSOR MAY BE BAD

This type of problem is so common nowadays. What I did is open up the casing, pulled out the RAM and by using pencil eraser, rubbed the contact pattern. Put it back and turn on your computer. Always work for me and hope it might work for you too.