SOURCE: Need to Re-Assemble my Graco Snug Ride Car Seat
Hi jessibee
I found the site that you need to get an instruction manual for the seat. You will need to find the exact model of the SnugSeat that you have, because there are quite a few to choose from.
to find the model/serial number...
Car Seat
Toddler or Booster - On the back of the car seat OR on the bottom of the seat
Infant - On the back of carrier OR on the bottom of carrier OR on the stay-in-car base
Thanks for using FixYa, a Fixya rating would be great for this advice.
Good luck.
regards
robotek
SOURCE: installing Graco car seats on the 1304TW Double Snap-n-go
The 1304TW Double snap-n-go is made by Baby Trend.
The manual can be down loaded from;
http://www.babytrend.com/products/20070606/L20076616120272613.pdf
Some instructions are included for Graco.
SOURCE: how to attach graco car seat safely to the duoglider
Yes. You will need to make sure you have one of the two tray tables that attach to the seats. Without this, you cannot use the Graco infant seat.
If you have the tray table, ensure it is attached firmly and properly to the stroller frame. Attach the Graco infant carseat facing the rear until you hear that it snaps in. This process is similar to snapping the carseat into the base that is in your car.
SOURCE: How do I remove seat cover on Graco Duoglider
there are tabs with screws holding them in place unscrew them and youll be able to slip the seat covers off.
534 views
Usually answered in minutes!
×