Bulova Millennia With Vibra-Alarm 98A48 Wrist Watch Change do you need to re start the watch by touching postive and negative on the inside back of the watch?

try this link
http://s3.amazonaws.com/bulova_production_assets/manuals/general.pdf?1311356771

Get it dried out as soon as possible as rust starts in as little as 48 hours. Then find out why it leaked. You will need a watchmaker

I could not find your watch on their web site, perhaps it is discontinued?

You may find a watch that is similar to yours however.

If you go to "Boluva.com", you will find a menu at the top of the screen. Click on "service centre" and you will see a list o watch types; click on "boluva" and you will arrive at a list of instructions.

A search of these might help.

Otherwise try their repair service, who might be able to help you.

I have seen these watches sold on ebay, just make sure it is the genuine made by Bulova.

Watches, well most quartz anyway, are programmed to alert it's wearer to the fact that the battery in the watch is growing weak and needs to be replaced. There are watches that use a 2 second split and then there are those, like my Bucherer quartz that hops at 5 second intervals. Remember, just because you put a "new in the package" battery in your watch does not guarantee that it is new by way of battery power. Some batteries go completely dead while sitting on shelves waiting to be sold. For those of you that don't know, take it from a man of experience, never... ever... ever... store loose change and opened, new or used, coin or watch batteries in the same junk drawer. They will combine chemically to cook off the battery cells like a .22 rounds and pieces can fly pretty fast. Have a great day!

The battery in your watch needs to be changed, this a warning the Bulova Millennia 98A48 gives before battery is drained.

Pull out the winding stem (crown) when second hand reaches 12 o'clock, set main time by ajusting stem, next press and hold A button "near 9 o'clock" hands will move quickly, when close to matching main time, release A button and press in and out quickly until it matches main time. Next push winding stem in, this will start the main and the sub-hands together for normal time. To set alarm press and hold A button until set time is reached, select B button alarm mode "2 o'clock" for beep or vibra, to turn alarm on/off press C button "4 o'clock" for 1 or 2 seconds, the sub hands will move rapidly until it reaches normal time and alarm will sound 3 times indicating it is set, finally when alarm goes off early in the morning for example you can press any button to stop. To reset alarm press C and it will go back to the original alarm setting.

I have a spare set of instructions if required.

The model sometimes is on the case back or inside the case back and the serial number inside on the movement. Therefore you would have to remove the case back. Be careful if you do this so you do not damage the case. Maybe better to have a shop do this for you.

hello audel

you can try here for a guide Bulova - Service Center - Download Instructions for Your Watch

riz.

From your book, start from square one. Second hand to 12 Pull crown to stop second hand.Set sub hands to duplicate main hands (correct time) Push crown in. I'm not that clever , I got the jeweler to do it for me.