Code list for symphonic tv - Symphonic Televison & Video

0510 0447 0810. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

082,089,099,021,083 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

Here is the code for your symphonic tv that works for me. It is "0053."


Here are the steps:
1.

Press the "On" button on the symphonic TV to turn that set on.

2.

Hold down the TV button on the symphonic remote until all of the buttons on that remote flash.

3.

Type in 0053 code for the symphonic TV remote as you point the remote toward the TV.

4.

Press either the "Power" or "Pound" ("#") button on the symphonic remote to save the code

try one of these
Symphonic 1003, 1022, 1023, 1028, 1035, 1045, 1131, 1164, 1206

if this info was helpful please vote for me

Symphonic tv codes are 0053 0189 0227 0456 0024

tv/dvd combos 0456

dvd/vcr combo 0456 {0458 & 0227}
{0899 & 0236}

hope this helps if not i can scan the code list for you

I can help you with your URC-3021 Universal Remote Control issues.

The codes for Symphonic TV's are: 0180, & 0171.

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

To control a Symphonic TV with a One for All URC-3021, follow these steps:

1) Turn on your TV.

2) On the remote, press the TV key once.

3) Press and hold SET until the LED blinks twice, then release SET.

4) Enter the first four-digit code from the following list:
0180, 0171

The LED will blink twice.
If it does not blink twice, go back to step 2 and try the same code again.

5) Aim the remote at the TV and press POWER.
The device should turn off.
If it does not turn off, repeat steps 2 through 5 with the next code in the list.

I hope that helps.

they dont list it as a combo unit but try 588 or 594 for the vcr button and 632, 657, 662, 692, 694, or 846 for the tv button
The manual is here http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/remotes/6.4_Guide.pdf

Try this method:
Turn on the device you want to program.
Press and hold CODE SEARCH until the indicator light lights then release code search.
Press and release the device button you are programing TV, the indicator light will blink once then remain lit.
Press and release OFF/ON until your device turn off.
you may have to press upto 200 times
When your device turn off press enter button the indicator light will go off,good luck.

The Quik 40 Operating Guide shows only one code for the Symphonic and that is 072.