Radio Communications Logo

Related Topics:

T
Tim holt Posted on Jun 10, 2018

My connex 3400hp gets out and receives you can hear static then you can't then you key up the mic and you hear static again

5 Related Answers

Gavin93

EDACS

  • 66 Answers
  • Posted on Jul 02, 2008

SOURCE: connex 3300 c.b radio

The Connex radio is a division of Cobra, and no offense, but Cobras are one of the cheapest radios around. The problem with your Connex is a simple receiver malfunction. The receiver probably worked great until it was put into storage for a long time, you can replace the receiver, or you can fiddle around with the receive gain until you hear something. But you may just want to send it to a radio store and have it looked at, to be honest with you, Connex is a terrible radio, they sound good, but they're terrible radios. Go with Galaxy or Uniden radios, you won't be disappointed.

Ad

Anonymous

  • 14 Answers
  • Posted on Nov 05, 2008

SOURCE: connex 3300hp

Poor ground shield, or poor solder joint in mic cable.

kb8dns

Rod Wallberg

  • 494 Answers
  • Posted on Mar 07, 2010

SOURCE: i just purchased a connex 3400hp and my cb freinds

The Cobra 29 has always been a good talking radio and is preferred by truck driver mainly for that reason! The Connex is a great radio in it's own right but sometimes needs a little help. I would suggest a power mic and there are many to choose from but Astatic is a clear winner! My two cents for a suggestion!

Mister 44

Jim Verge

  • 35 Answers
  • Posted on Apr 03, 2010

SOURCE: connex 4600 turbo radio stays keyed up even with

Bad RX/TX Transistor? I don't have a diagram for the 4600. Sorry!

anymhz

AnyMHz.com

  • 500 Answers
  • Posted on Dec 16, 2010

SOURCE: after you convert the connex 3400hp from ham to

you will need a frequency counter, to show the channels. 1-40 and the others are allocated as frequencies. there are lists available showing ch1 band A is ??? so forth. there shouldn't be uppers or lower on it its just a AM/FM only radio NO SSB.

and these ARE NOT AMATEUR / HAM radios!!!!!!! these are EXPORTS...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I want to peak and tune my connex 3400hp

people think that if they peak and tune a radio it will work better. First, if its brand new from the factory you shouldn't have to,all you should have to do is lower the dead key raise the modulation and you are good to go . The proper way to do this is with a spectrom analyzer . Do you have one? Cheap on ebay ,may 4000-5000 dollars but if you get one and set that radio perfect you should hear anyone complain that you are interfering with their radio.
0helpful
1answer
0helpful
1answer

I have a Connex 3400hp and it just topped receiving all of a sudden while driving down the road

did you check to see if it was still plugged in.maybe the reverse polarity diode or a crack in the pcb
0helpful
1answer

Converting 10 meter to 11 meter on Connex CX-3400HP CB RADIO

Turn the mode switch to the setting you want and leave it there .
0helpful
1answer
0helpful
1answer

I have a connex cx-3400HP d and a r not working until the unit get's hot

Take it to a good cb shop radioactiveradios do really good work on connex radios
0helpful
2answers

I just purchased a connex 3400hp and my cb freinds tell me that my other radio sounds better than the cx 3400hp,my other radio is a cobra 29 ltd classic.my 29 has more audio and modulation and both radios...

The Cobra 29 has always been a good talking radio and is preferred by truck driver mainly for that reason! The Connex is a great radio in it's own right but sometimes needs a little help. I would suggest a power mic and there are many to choose from but Astatic is a clear winner! My two cents for a suggestion!
0helpful
1answer

Connex 3300hp

Poor ground shield, or poor solder joint in mic cable.
0helpful
1answer

Connex 3300 c.b radio

The Connex radio is a division of Cobra, and no offense, but Cobras are one of the cheapest radios around. The problem with your Connex is a simple receiver malfunction. The receiver probably worked great until it was put into storage for a long time, you can replace the receiver, or you can fiddle around with the receive gain until you hear something. But you may just want to send it to a radio store and have it looked at, to be honest with you, Connex is a terrible radio, they sound good, but they're terrible radios. Go with Galaxy or Uniden radios, you won't be disappointed.
Not finding what you are looking for?

191 views

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66944 Answers

Patrick Patterson
Patrick Patterson

Level 1 Expert

6 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...