Hoe to turn on speaker phone on a vtech phone model C56124

Since you didn't give the model of your VTech 2.4GHz system I can only answer in general terms. On most models you can turn up the ringer volume by pressing the up-arrow or + key while in standby mode. You can turn up the speaker volume by pressing the up-arrow or + key during a call.

If you need a manual, enter the model number into the search box at http://www.vtechphones.com/support/general/manuals

long hold on hash key, had this prob and just fixed it on my vtech :)

Since you declined to specify the model of your VTech phone, enter it into the search box at
http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/
to download the manual.

Since you declined to specify the model of your VTech phone, enter it into the search box at
http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/
to download a copy of the manual.

Since you didn't specify the model of your VTech 5.8GHz phone, enter it into the search box at
http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/
to download a copy of the manual.

Since you neglected to specify the model of your VTech 5.8GHz cordless system I can only suggest you enter it into the search box here to download the manual.

i have had the same phone and it also did the same thing to me its in your speaker inside phone theres a short in speaker wire there isnt no way of fixing it only if you want to take it apart and play around with the speaker wires.

Unless your model specifically says it's a speakerphone, you can't do that. The base mic and speaker are only there for recording your outgoing message and listening to your messages. If it is a speakerphone, there should be a button on the base to activate it.

You can find manuals and other information about your model at Vtech's site.

Since you neglected to specify the model of your VTech system I can only suggest you enter it into the search box here to download a copy of the manual.

Download Vista driver from VTECH website:

http://shop.vtechcanada.com/vtt/en/support/downloads/software/USB7100_Software_vista.cfm

After running the executable make sure that your normal speakers and microphone are set as the default ones, otherwise VISTA may try to use your phone as speakers and microphone.

Good luck!