How 2 Check Printer Mode of Konica minolta bizhub 215 Of A4 Paper By tray1 & Bypass A4.APS error A4 Size Done

Check the paper size setting for both the computer and the copier.

Your paper size is different from computer setting

go to device and printer click your bizhub 215 click printer preference click back click paper size ser A4 then ok and print

Go to the control panel under paper select bypass tray set to A4 or 81/2x11 select weight and the go to computer select bypass tray and paper weight

set the paper bypass tray to the size of the check mite need to be customize measure the checks and tell the copier the size its x and y size A4 is same as letter size except its for the rest of world USA is letter and the rest is A4. A3 is 11x17.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

first you need check paper size setting then clean your paper pickup feeder with wet cotton cloth

flip out the bypass tray

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

does it get jammed from draw #2? does a4 jam in tray 1 and by pass

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Clean the paper size sensor and change the by pass paper tray size setting on the display "Paper tray change" setting mode.

A4 paper equals 8 1/2 x 11 paper wrong paper setting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check default setting with bypass try
usually it is letter size change into the a4