I need time setting instructions for sioscan cn4voou

go to link below for instructions
http://www.citizenwatch.com/en-us/support/setting-instructions/

go here for instructions > http://www.armitron.com/watch_instructions.asp

To change from Military time to AM/PM just hit the reset button in the top left corner on the 45/7012. You will see a little am or pm pop up.

set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

I searched on "sioscan" and all I could find was "skyscan".Is this your clock?

If it is, you can copy "skyscan.info/content/quick-ref.html" into your search engine, you will arrive at the skyscan web site instructions.

i need time setting instructions for toy watch crystal

Use this link: http://www.citizenwatch.com/COA/English/settings.asp Fill in requested details of your watch and click on GET SETTING INSTRUCTIONS, then click on INTERACTIVE SETTING INSTRUCTIONS. There you will find everything you need to set up your watch. You can download instructions on this site as well.
Rate me, please.

Managed to set the home time - through trial and error.
Left it at the window for a few minutes and VOILA - the watch did the rest.
MAGIC!
It keeps time perfectly.

i have a CL-5073

to set time:

HOLD "Set" for 3 seconds
then use "Mode" to browse through option
When you get the time setting hit "St/Sp" to set the time
When you're done press "Set"

hope this helps