Configure dap-1360 range extender - Computers & Internet

chek this link
https://www.digitbin.com/make-not-secure-site-secure-chrome-fix/

Go to this link http://support.dlink.com/ProductInfo.aspx?m=DAP-1360 and download the user manual for your DAP-1360. Configure it in the WISP mode following the manuals instructions.

VISIT the dlink website,you can get assistance with your query
http://support.dlink.com/emulators/wbr2310/lan.htm

Is this the router that is currently connected to your network, and also the router that is providing you with internet right now? what would you like to setup?

Hey, you're almost there. The connection between the no-wireless PC over ethernet to the DAP-1360 Repeater is fine. The reason it can't connect to your LAN or the internet, however, is that the repeater isn't actually repeating your Ofir network, it is instead creating it's own, completely isolated wireless network (Ofir_EXT).


The D-Link setup and documentation is confusing, and doesn't have proper instructions for the repeater setup.


Rerun the setup wizard, setup as a repeater, then select manual configuration method.


Now, enter the wireless network name of your the network you want to extend (in this case, Ofir). Then enter the same security and password etc. for Ofir in the following fields, just like you were connecting to Ofir from a smartphone or laptop.
Once that is finished, you should be up and running. If things worked, you should NOT see any new wireless network. There should be Ofir and just Ofir. Wireless repeaters work invisibly, you'll still connect to the same network like you always did, but now it will have much improved range thanks to the DAP-1360. The computer entherneted to it should be networked on the wireless LAN and have internet access after this as well.



Good luck, I hope my instructions were clear. Wifi networking is easy, it's understanding all the manufacturers less-than-intuitive software that makes it hard.

have you tried turning on and off the router and AP? it would scan again...it looks like you just need to recheck connections and powers...

Power-off your DSL/Cable modem, and then turn it on.
Power-off your router, and then turn it back on.
You should now have an Internet connection.

It is printed on the bottom of the router.

Yes there is, you can buy a wireless range extender/booster like DAP-1360 WIRELESS N RANGE EXTENDER http://www.dlink.com/DAP-1360

just make sure that you belong with in the same IP range.
default DAP-1360 IP is 192.168.0.50
username : admin password :
change your PC IP address to 192.168.0.xxx (e.g. 192.168.0.2)
from there you may choose wizard or manual configuration.
you may change your DAP-1360 IP add according to your network settings in the office and you must change you PC IP address with in the same range.