What are the steps to enabling the start window on an intel inside nextbook

Acces the Java Control Panel:
you can find the Java Control Panel through the Windows Start menu.

1. Launch the Windows Start menu
2. Click on Programs (All Apps on Windows 10)
3. Find the Java program folder
4. Click Configure Java to launch the Java Control Panel

If you don't see the Java folder then assume Java is not installed o your computer, then go to https://www.java.com/fr/download/manual.jsp

• In the Java Control Panel, click the Security tab.
• Select the option Enable Java content in the browser.
• Click Apply and then OK to confirm the changes.
• Restart the browser to enable the changes.

Hope this help...

Right click on the start bar, select properties, then click the start menu tab, then click the customize button and enable the control panel.

Run the troubleshooter. Follow these steps:
a. Press the 'Windows + W' key on the keyboard.
b. Type troubleshooter in the search box and then press enter.
c. Click hardware and sound and run the Hardware and Devices Troubleshooter.
d. Follow the On screen instructions.
In addition, Follow the mentioned steps to enable Touch tab if it is disabled:
a. Navigate to Start screen. In the Start screen, click on
b. Control Panel tile.
c. In control panel Window, Scroll down and tap on the "More Settings" option.
d. Old Control Panel window will open.
e. Next, go to Hardware and Sound and after that click on Pen and
f. Touch option. Pen and Touch window will open.
g. Now, in the Pen and Touch window, navigate to Touch tab option. Check whether Use your finger as an input device box is unchecked, if so uncheck it. Then press
h. Apply and then OK.

you might have to reset it
Most modern laptops with touchpads offer vertical scrolling, horizontal scrolling or both. These features are located along the right-hand and bottom edges of the touchpad, respectively, and are activated when you swipe your finger along the touchpad edge. Scrolling functionality is nearly always enabled by default, but some users find the feature an annoyance and elect to turn it off. In most cases you can simply turn the feature back on using the Windows Control Panel.

Click the Windows Start button, select "Settings," and then click "Control Panel." Double-click the icon labeled "Mouse." Select the Touchpad properties tab. The labeling of this tab varies, depending on your computer manufacturer, operating system version and the device drivers installed on your machine. Common labels include "Touch Pad," "Device Settings" and "Dell Touchpad." If you do not see this option, you may not be able to turn on scrolling for your laptop; skip the remaining steps and refer to the "Warnings" section below. Click the "Settings" button within the Touchpad Properties menu and look for the section labeled "Scrolling Settings" or similar. Enable scrolling within this section and define other scroll settings, such as scroll zone width and scrolling speed. Click "OK" to confirm your changes, and then close the Control Panel windows opened in the previous steps. The scrollbar on your laptop is now enabled.
Scroll Is Not Working With Windows 7 b> Certain computer touchpads have a vertical section on the pad itself that is used to scroll through the page or program window that you are currently viewing on your computer. If the scroll functionality suddenly stops working but the actual touchpad is still fine, this means that the part of the software for the device that controls the ability to use the scroll has been disabled. You can enable it again in the Control Panel.
Click "Start." Click "Control Panel." Click "Mouse." Select the "Enable Scroll" option (or whatever similarly named option is available on your specific model of laptop computer). Click "Apply." The scroll bar on your touchpad will now work again.

b>

Hyper-threading is technology available on some Intel processors. If your process and motherboard are hyper-threading, you can enable to option in your Windows operating system. Hyper-threading allows your processor to perform multiple operations at once. Hyper-threading is used on multi-core processors and will share the workload among each core.

Restart your computer and repeatedly press the "Del" key or the F2 Key to enter BIOS this will vary depending on your computer and BIOS Press "Tab" to highlight "Main" then use the down arrow key to select "Hyper-Threading-Technology" then press "Enter". Select "Enabled" then press "F11" to exit and save changes. Your computer will now restart with hyper-threading enabled. Click "Start" then "Control Panel" and double-click "Device Manager". A window will appear showing your computer's hardware devices. Click the "Processors" drop-down menu. Right click one of your processor cores then click "Properties". Confirm hyper-threading is enabled. Hope this helps.

From the Start menu, either go to control panel=device manager or type device manager in the run box.

In device manager, you can right click and enable your sound device.

Step 1: Click on Start and then click on control panel.
Step 2: Hardware and Sound......Devices and Printers....Mouse.....Mouse Properties.....Device Settings.....Touchpad.......Enable........(Windows 7).

In Windows XP

Click on Start and then click on control panel.

Mouse.....Mouse Properties.....Device Settings.....Touchpad.......Enable.

Even though it does not show the connection on your monitor, the connection may still be working. Did you post this problem from the same computer? If yes, then you are fine.

a lot of computers, like myne for instance, use a proram either natve to the computer like wndows, or something like intel PROSET wireless. i would recommend doing a computer search for these or other programs like these.

If you are using a windows XP as an OS...make you have loaded all your drivers inclucing the LAN. Secondly from the START go the control panel--network and internet connections--network connections--you'll see the LAN icon/s.Right click on it and select Enable/Disable.