Motorola xpr7550 how do I reset it to factory default?

Question edited for full 'make model (what it is).
Question moved to Motorola.

How do I configure the Roadster 2™? - Motorola Support

https://motorola-global-portal-en-ca.custhelp.com > a_id
Reset to factory default. Description: Restores the device back to the default settings. Caution: This action erases all pairing information stored in your ...

MOTOROLA ROADSTER™

https://www.motorola.com > Roadster_QSG
PDF
Reset to factory default. Caution: This action erases all pairing information stored in your car kit. • Voice prompts. • Caller ID.
108 pages
Try a reset on it.

You can reset your system by deleting the vehicle profile from your phone and disabling Bluetooth on your phone. Your vehicle's phone profile needs to be deleted. If you have such an option, disable Bluetooth on your vehicle. You can now pair your phone and the vehicle infotainment system by enabling Bluetooth.
Dec 5, 2021

How To Pair Motorola Bluetooth Tz710? - Nstec.com

https://www.nstec.com > how-to-pair-motorola-bluetooth-...

My motorola xpr7550e has radio locked on the screen what can i do

There is no password on the SB6141.
There are no user configurable options. Any configuration is changed through communication with the CMTS.

When you access the modem (192.168.100.1) all you can do is monitor the signal quality and certain log entries.

NOTE: the "configuration" page allows you to reset the factory defaults and to restart the modem. IF you reset factory defaults this note applies:


Resetting the cable modem to its factory default configuration will remove all stored parameters learned by the cable modem during prior initializations. The process to get back online from a factory default condition could take from 5 to 30 minutes. Please reference the cable modem User Guide for details on the power up sequence.

You would need a saved copy of the default codeplug to rewrite it back into the radio using the Motorola proprietary software and appropriate cables. Your local dealer or an online repair facility may be able to help.

take a cps file from harddisk and overwrite radio. then password is gone

This is the reset username Username : reset Password:
MAC address XX XX XX XX 10 20 = IP address of 169.254.16.32 *10 in Hex = 16 in Dec *20 in Hex = 32 in Dec

Please note: All phone data will be deleted. Data on the SIM card is not deleted. Restore the factory default settings

• Press the menu icon.
• Press Settings.
• Press Privacy.
• Press Factory data reset.
• Press Reset phone.
• Press Erase everything.
• Wait a moment while the phone restores the factory default settings.
• Follow the instructions on the display to configure the phone and prepare it for use.

You can permanently erase all user data stored on the phone, and reset settings to factory defaults by performing a Restore.
To perform a Phone Restore:

1. Tap Menu
2. Tap Settings
3. Tap Security
4. Enter your 4 digit unlock code. (Default 1234, 0000, or last 4 digits of your phone number)
   Tap Done
   
5. Tap Restore Phone
6. Tap Yes when prompted with the following message Permanently Erase All User Data & Reset Settings To Factory Defaults?

Note: You will have to dial *228 after the phone power cycles to re-program the phone.

For the motorola router's default username is "admin"; The router's default default password is "motorola".

If it is a Motorola-Cablerouter then default username is " cablecom"; The default password is "router".

Reset the router to Factory Defaults if the password is not working and re-configure it .

here is ur manual for Ming just see the 126 page for Master reset

http://www.scribd.com/doc/2623841/Motorola-Ming-A1200

Pls rate me FIXYA fo rhelp