How to keep the clock displayed on an LG LCRT2010ST

If the display comes and goes the only fix is to replace the complete control panel, a very expensive part.

It is energy saving mode, its a bad design because it doesn't let you keep the clock displayed. Only will stay on 5 min

I just successfully replaced a Thermadore MBBS microwave with an LG Model #LMC2075ST (Lowes stock number 728040). It was close to a perfect fit into the Thermadore trim kit and attachments, and very easy install. The LG was only $169 on sale at Lowes, and is, by far, a superior microwave to the old MBBS model.

Obviously someone has worked on this unit and wired the wrong wires to the door microswitch

switch is faulty at inside could be burnt

very very unsafe

replace fuse inside with 10amp

PCB

1. Defective controller or its power supply.
2. Broken display panel.
3. Oven needs to be reset (pull plug for a minute or two to reset).
God bless you

If your clock is not keeping the correct time and you have done everythinh right, the problem lays within the IC or M icroprocessor on the Printed Circuit Board which the lcd clock display is attatched too.