Humidifiers Logo

Related Topics:

HONEYWELL HUT-220B Ultrasonic Cool Mist Humidifier: unit has water but no Cool Mist.

5 Related Answers

Anonymous

  • 7 Answers
  • Posted on Feb 12, 2008

SOURCE: Crane Adorable One Gallon Cool Mist Ultrasonic Humidifier

I posted the instructions for cleaning the unit a little while ago, but under a different Crane humidifier product. See http://www.fixya.com/support/t253969-cleaning_instructions

Ad
A

Anonymous

  • Posted on May 30, 2008

SOURCE: Humidifier mist won't come out of tube

sounds like the small fan that is located in the base isn`t pushing the mist out. unplug it then take all the screws out of the base. there are screws under the black foam stands too. be careful not to touch anything that looks like live wires while you look inside then look inside while it is pluged in. it should turn. check for something blocking it like lint or dirt..you may be able to clean around the shaft with w d 40

freetek

Steve Allison

  • 5569 Answers
  • Posted on Nov 08, 2008

SOURCE: sunbeam ultrasonic humidifier runs but produces no mist

It sounds very much like the transducer has failed. This is likely a crystal transducer and since they produce the agitation that should cause a mist, they are running continuously; not a good thing for something that is trying to shake iteslf apart all the time. These require input from a circuit that produces the fairly high level of power needed to drive the crystal so it could also be the source of the problem.
This isn't something an owner is able to diagnose unless they have some technical training.     

freetek

Steve Allison

  • 5569 Answers
  • Posted on Nov 08, 2008

SOURCE: Need parts for Sunbeam ultrasonic

I see you have been waiting on a response for some time and I suggest you contact Sunbeam (if you haven't done it already) at their website for Canada:
Sunbeam Canada Customer Service 

gregloechel

Greg Loechel

  • 283 Answers
  • Posted on Jul 29, 2014

SOURCE: Kidsline ultrasonic cool mist humidifier is not

Hi Shayla, when did you notice the thing wasn't working!!>>??

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I clean the dual tank ultrasonic humidifier membrane

Air Innovations Clean Mist Ultrasonic Dual Tank Humidifier ...

www.qvc.com/Air-Innovations-Clean-Mist-Ultrasonic-Dual-Tank-H...

QVCAir Innovations Clean Mist Ultrasonic Dual Tank Humidifier. Air Innovations ..... I did not realize that you needed a special filter if you have hard water. If you do ...

Sharper Image Dual Tank Warm &Cool Mist Ultrasonic ...

www.qvc.com/Sharper-Image-Dual-Tank-Warm-&Cool-Mist-Ultras...

QVCSharper Image Dual Tank Warm &Cool Mist Ultrasonic Humidifier ..... I've only had toclean the membrane once since I purchased it, and that's really not a big ...

How to Repair an Ultrasonic Humidifer ' eBay


Dec 14, 2015 • Humidifiers
0helpful
1answer

Motor runs but no mist comes out on EV-HD15

If there is water in it, it sounds like the ultrasonic unit failed.
0helpful
1answer

Humidifier will produce mist for a min then stop If you look you can see it producing mist within but it will not come out of the top Walgreens cool mist ultrasonic humidifier

I have had times where my Crane humidifier won't produce mist if I haven't turned it on for several days (4+) or more. The water that sits in the reservoir may develop a film on the ultrasonic element which inhibits the creation of the mist to come out the top of your humidifier. I would lift off the tank and empty the reservoir. Then VERY GENTLY with a piece of paper towel, wipe the ultrasonic element (looks like a disk the size of a quarter at the bottom of the reservoir) to clean off any film. Then replace the tank and let the reservoir fill up the tank and try it again.

If your humidifier runs properly for a minute and then makes a whirring noise and goes silent (like the motor stopping), then it's a motor problem. The humidifier motor may have gone out of alignment due to bumping or rough handling of the humidifier when cleaning or emptying it. If that is the case, you will have to empty the humidifier reservoir, unscrew the base, and find the screws holding down the motor and check for misalignment. Loosen them a little and put it back together and try again.

Best of luck
thebqe
Feb 13, 2014 • Humidifiers
0helpful
2answers

Trane furnace humidifier not working

If there is water and power to humidifier you need a new solenoid valve or humidistat.
7helpful
2answers

WHY DON'T MIST COME OUT OF MY HUMIDIFIER

with cool mist humidifiers your not suppose to see any mist. if it's a warm mist there should be. but by your model number i'm finding that it's a cool mist. that's why your not seeing any mist.
0helpful
1answer

No mist, but i can see a water droplet fountain on the surface

if it's a cool mist unit it will not produce any mist. now if it's a warm mist unit it should. that's normal. it is possible to replace the transducer if it is damage but you are going to have some leakage from it. but the only way to get the transducer mainly is from the manufacturer
10helpful
2answers

Sunbeam ultrasonic cool mist humidifer model 700

The Problem is minerals in the water. Impeller and ultrasonic designs send these minerals into the air. If the water in your area contains a lot of minerals, you will notice them as dust. The EPA does not issue health warnings about minerals in the air, but does recommend using low-mineral water (such as distilled water) in your humidifier. Many ultrasonic models feature a demineralization cartridge that filters minerals out of the water to prevent the dust.

Good Luck.
Not finding what you are looking for?

388 views

Ask a Question

Usually answered in minutes!

Top Honeywell Humidifiers Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Honeywell Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...