No code for Sony DVD/VHS for Innovage jumbo remote

Would you like to program your Innovage Jumbo Universal Remote to your TV, DVD, VCR, Satellite or Cable Box?
Have you tried the Auto Search function?

To have the remote try each TV code it knows one at a time, follow these steps:

1. Turn on your TV.
2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
4. Press the ON/OFF button slowly and repeatedly untilthe TV turns off. The LED will blink once each time you press theON/OFF button.
   
5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.

When searching for a TV code, the remote will try all the codes it knows for every TV brand it know. To search for a DVD or CBL code, make sure you substitute the DVD or CBL button for the TV button in the directions above, because it doesn't attempt DVD codes while in TV mode.

When programming the Innovage Jumbo Remote control for cable or satellite services such as DirectTV or Comcast, or other digital TV and service providers, make sure to auto-search through both CBL and SAT code sets to find one that will control your set top box.

I hope that helps.