Can i pair vivitar bluetooth earbuds to my laptop

To pair with bluetooth, it depends on your model (TWS, SoundPods)

Turn on Bluetooth on your device

Remove one or both earbuds from the charging dock. The earbuds will have a flashing blue and red light indicating they are ready to pair

Long press the multi-function button for 3 seconds to power SoundPods on. When the Earbud LED Indicators flash red and blue, they are ready to be paired.

from the manual, https://manuals.plus/ihip/tw003-soundpods-wireless-earbuds-manual#ixzz7bR6q1b9Z

If your laptop has bluetooth, ensure the ear buds are not paired with anything else and follow the pairing procedure on the laptop and ear buds.

Make sure that the pair on your output device states paired for phone and music. It can still pair for phone and data but not pair to stream music. This is common on android devices especially. If this be the case, unpair the device and forget (delete) the earbuds on your output device. Ensure any bluetooth devices like amazon Alexa, TVs and other common things are powered down. Turn the bluetooth on the output device off, then back on. Search for earbuds and follow manufacturer procedures to sync earbuds. Once found, pair. Ensure when a successful pair happens that they are paired for phone and music. It will tell you on the output device if the pair was successful for both. At this point make sure your volume settings are not muted or all the way down and you should be enjoying music if you have an app playing music.

be sure bluetooth is on. also turn both headphones off. once headphones are off, start scanning for bluetooth devices. once scanning, hold the power button down on both earbuds for ten seconds or until theyre both flashing red and blue. your device should then notify you about pairing.

I heard that you connect first with one and the other one with side button connects to the other Bluetooth headpiece.

To get help pairing a Bluetooth accessory-like a wireless keyboard-to your iOS device, try these steps:

1) On your iOS device, go to Settings > Bluetooth and make sure that Bluetooth is on. If you can't turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad, or iPod touch. Then try to pair and connect it again.

2) Make sure that your Bluetooth accessory and iOS device are close to each other.
3) Turn your Bluetooth accessory off and back on again.
4) Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

If you still can't pair or connect your Bluetooth accessory.

1) If you previously connected your Bluetooth accessory to your iOS device, unpair the accessory, put it back in discovery mode, then try to pair and connect it again.
2) If you can pair your accessory with some devices but not your iOS device, unpair the accessory from your other devices. Then try to pair with your iOS device again.
3) Check with the accessory manufacturer to make sure that your accessory supports your iOS device.
4) If you still have any of these issues, contact Apple Support:
You can't turn on Bluetooth or the setting is grayed out.
You can't connect any Bluetooth accessories with your device.
The accessory manufacturer confirmed that your accessory is working correctly.

Ready to pair indicator

Install Service Pack 1. Up until this was released a couple days ago, I was never able to get my HT820 to work with my Dell XPS with internal Bluetooth. After SP1, it worked.