The psp runescape way!

Maybe ur mem card is busted? Try FORMATiNG ur mem card in ur PSP! or insert ur card into the slot and try to press the card at one side....see if ur PSP register the card, sometimes the card contact point didn't touch PSP's contact pins!

This is a problem occurring in all the play station consoles....... this is mainly because of the poor quality of the disc.....as a result it leads to the damage of ur PSP lens..............use good original discs........the heating effect is due to the long usage of pirated discs ...
check your lens if its working good then better download this Repair Guide for further information .........
CLICK HERE to download

there is no firmware 5.30

dude itz 5.03

thats the firmware im using and im a certified 3000 user

hehe

but ur ryt the chickhen is block in 6.10 and lower

so u cant play any eboots and iso/cso

dont give up try to google it and try psp slim hack

hope ur a good internet surfer like me.hehe

freewebs. com/ roshanb/ runescapeonpsp.htm helps(take out spaces)

Latest CFWEnabler : 05/07/2009
Download:
http://2f19b96d.seriousfiles.com

Changelog:

- Fixed a bug when playing within Infraestructure
- New system version
- Improved the Pops flashing system
- New update server.

Just copy the CFWEnabler folder into /PSP/GAME , then go to Games and run the installer

1)INSTALLING 5.03 OFFICIAL AND LOADING CHICKHEN R2



a)INSTALLING 5.03 OFFICIAL

Firstly, you CANNOT do this unless you hava a PSP with Version =<5.03 . To check your PSP FW go to Settings-> SystemSettings-> System Information . If the version is 5.03 , skip thispart and follow the guide below to install ChickHEN . If you have alower version follow this GUIDE in order to install OFW 5.03 .

-Download 5.03 OFW (http://135ff34d.seriousfiles.com)
-Connect your PSP to your PC via USB and create a folder in PSP/GAME named UPDATE.
-Copy the .EBOOT file in PSP/GAME/UPDATE.
-Run the update from your PSP .
Now you should have a 5.03 OFW PSP , just what you need in order to load the Tiff Exploit.

b)LOADING CHICKHEN R2

Some useful tips for those who can't get the ChickHEN to work :

-Restore Default Settings
-Set UMD Auto Start and Cache OFF.
-Make sure you're on 5.03 OFW
-Format Memory Stick. ( this will erase all the data from your MSso you'd better backup your files on your PC before doing it )

-Try another method as this video shows :
(http://ad452dd7.linkbucks.com)
-Don't give up , just try and be patient.

Note that the files needed for PSP 2000 and 3000 series are different than the ones needed for PSP 1000 so don't screw it up.

Note that the files needed for PSP 2000 and 3000 series are different than the ones needed for PSP 1000 so don't screw it up.

DOWNLOAD:
FOR PSP SLIM ( 2000 & 3000 ) :

-Download ChickHEN R2 Easy to Load
(http://0639570b.thesefiles.com)

FOR CLASSIC PSP ( 1000 ) :

-Download ChickHEN R2 Easy to load
(http://d249d993.thesefiles.com)

-Copy h.bin to the Memory Stick ROOT .
-Copy ChickHEN folder to PSP/PHOTO ( create one if needed )
-Navigate to your PHOTOS folder , and enter the ChickHEN folder.And wait, you will see some images, these will start to loadthumbnails.Go all the way down to the last image. Your PSP may freezeand reset. Just keep retrying and ChickHEN R2 will load up….But if yousee flashing colors, your PSP will reboot loading the ChickHEN.

For those who can't load the ChickHEN files check above for useful tips and remember to restore default settings.

Check your PSP's version to make sure. If the version is somethinglike 5.03 ChickHEN R2 you should be fine and ready to install CFW.

2)INSTALLING CUSTOM FIRMWARE

Do NOT try this on any PSP 3000 or PSP 2000 unhackable mobo's this is only for PSP Phat and 2000 hackable series.
This will permanently install CFW onto your PSP
ChickHEN must be enabled.

-Download Recovery Flasher 1.60
(http://926291d9.thesefiles.com)
-Download 5.0 OFW
(http://a3b04c08.thesefiles.com) -direct download
-Copy the Recovery folder to PSP/GAME .
-Also copy the 5.0 official update renamed as 500.pbp to PSP/GAME/RECOVERY folder .
-Go to GAME and run the program and install 5.0 M33-6 !

In the end , press SELECT while in XMB and change UMD Iso Mode to''M33 Driver'' or ''Sony NP9660''. I also recommend formatting memorystick. Place your CSO/ISO games to the ISO folder on your memory stickroot.


GUIDE created by : PSPgamen OF AFTERDAWN
Any questions ? probs ? post here !
Enjoy :)

i think on ur ps3 remote settings make sure your psp is on it should see the psp and for the internet you have to have it on ur ps3 it will then send a connection to your psp

u need to be in a wi-fi ready place so u can browse ur internet in ur psp...

if u want to connect to online gaming u will need to first register on the playstaion network.

This tutorial shows you how: http://www.freewebs.com/roshanb/runescapeonpsp.htm

Look its not necessary get internet on ur psp. Its how to connect to the internet on the psp. You are gonna need a wireless internet network. Usually at food restaurants, or at ur house. Its not like you can connect the psp with a cable to the internet. Its all wireless hottie262477. To find wireless go all the way to your left on the psp and turn on the wifi button. Then go ur settings and all the way down to network settings. From there click on infracture mode. And scan for wireless hotspots. Of course any wireless one that says it needs a wep code. Means that it has a password and if you don't know the password you can't necessarily access it. So use the no password hotspots. Also remember its very easy to connect a wireless network in your house as long as u have high speed internet. Now that you this u can enjoy ur psp and play online and use the web browser. Good luck Diego :-)