Why does my lorex dvr/pvr not show camera pictures on my hp monitor anymore. the monitor prompts that the display is going to sleep.

SOURCE: Normal Picture Mode Not Available With Cox HD-DVR (Motorola DCH3416) and HDMI Cable

With an HDMI cable connected, the cable box determines the picture size. The settings on the cable box must be changed in order for you to get the correct picture size. I have some experience with Motorola cable boxes; usually to access the settings you turn the box OFF and then press the menu or settings button on the box to bring up the display menu. Hope this helps!

SOURCE: No Input Signal, Monitor Going to Sleep

if you have twisted od bent the cord to much the wires could have broke inside the cord.

SOURCE: cant access lorex DVR from the internet

i have the same trouble, and i did what u said and it doesn`t work yet:S something else????

SOURCE: Acer X223W monito won;t wake up after sleep.

I have a dual monitor system, both are the x223w. Same problem but only on the second monitor. Backlight shuts off.On/off light stays blue. I have to turn off the monitor and turn it back on. I returned it and Acer could not find any problem so I got it back. No problem for awhile and now a few times over the past couple days. Not good...

SOURCE: sony kdl-40v5100 has handshake problem

1.This issue sounds as though the TV connection circuit has an issue.
2. You have changed the DVR and the HDMI cables and you still have an issue with the video (pink screen) indicates a video circuit issue ( improper voltage or current) at the video section of the circuit.
3. This will require some troubleshooting by a qualified tech.
4. To make sure, try connecting another properly working LCD TV to the cable box or DVR an check.If you get a picture and sound properly it is the TV.
5. Usually a cable box is QA'd (quality assured) by the company and will not be sent unless tested 1st