Trying to set the gxp2000 with 3cx pb x - Grandstream GXP-2000 IP Phone

Hey Rick,
i would use a squirt of two things... A good shot of PB Blaster to break it free and the WD40 to aid in wicking around the rings (which is what is really stuck) into the spark plug hole.. and put the plug back in.. wait 24 hrs.. try to kick it,, if not kicking..repeat the spraying...wait 48hrs.. IF the piston is stuck, it will break free.
Once you get it running...change the oil immediately!!!
Blaster PB Penetrating Catalyst Penetrant Walmart com

WD 40 Smart Straw Spray Lubricant 10 oz Aerosol Can 6 CT Walmart com

Try spraying some PB Blastor directly on the key before inserting...also spray with the fine tube a little PB Blastor into the ignition switch...this is safe for electrical parts...wiggle and retry...Your local locksmith can replace the key switch for you...the air bag usually prohibits self repair...:( You can buy the PB Blastor at Walmart and auto stores...

YOU MIGHT CHECK WITH TECH SUPPORT FOR THAT DEVICE AND GOOGLE THIS DEVICE FOR ISSUES OTHER MIGHT BE HAVING YOUR SAME PROBLEM(S)...?WITH AND YOUR MANUAL MIGHT NEED TO BE CHECKED FOR SOLUTION(S)...?

Open following link for setting Intermatic/Grasslin FM1 timer setting instructions:
To set the 24-hour analog timer, you need to move 4 consecutive tripper pins for each hour of run time.
So for 6 am to 6 pm, 48 trippers pins will be moved outward and 48 inward.
http://waterheatertimer.org/pdf/How-to-set-Intermatic-FM1-timers.pdf

Open following link for Intermatic FM1 series and PB series modular timers with wiring, manuals, model numbers and instructions for setting.
http://waterheatertimer.org/Intermatic-trippers-and-parts.html#PB

Add a comment for more help

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

You may have to set-up the DVD player for component (Y,Pb,Pr) output instead of S-video. You may have to set DVD player to progressive-scan or 720p or 1080 video out, also.

Oh god, poor you dude. That's an arbitrary PB kick. That means PB believes your client file is hacked or some other nonsense. This is a PB problem, there is no fix, just try to reinstall your game and delete all your player profiles. This is one more reason to hate PB...

There is no calibration for the component video that I know of, check your cables you may have a bad Pr cable or the Pr/Pb ones may be mixed up.

Y (the green one) is for luminance, plug in ONLY this connector and you should see a black and white picture.

Now connect the Pr. You will now see red tones.

Now connect the Pb. And you will see blue tones.

Reverse the Pr and Pb and see what happens.

Oh and make sure you don't accidently have one plugged into a composite video or digital audio port.

Still not looking right?

Go into the input menu of the TV and change the component (or colourstream) input from RGB to Y/Pr/Pb. (most TVs do not have this feature.

Hope this helps!

Well, first you might want to try another hdmi connection behind your TV.If it appears to have the same message,you need to check your TV setup and be sure the HDMI video is active.
Secondly,go with the recommendation of the set top box.You will use component video cable to connect from your set top box component video output(Y PR PB) to your TV (Y PR PB) and see if that actually work.If so,just use the cable box for the time being and call your cable company for another cable box to replace this one!
solutiondoct

I have the same exact problem. Same model, etc. Is there a resolution?