Question about Home

1 Answer

I have the Atomic Clock model W86111. I had to change the batteries on the outside device. The clock outside temp just flashes 63.5 all the time. How do I make it sync to the device outside?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 131 Answers

Remove all batteries from outdoor sensor and weather station.

Press one of the buttons on the weather station at least 20 times to clear all memory.

Verify that the weather station is blank before proceeding (there may be lines painted on
the screen that will show when power is removed).

Leave both units without power for 15 minutes (very important).

Insert fresh batteries into the clock.

Insert fresh batteries into the outdoor sensor.

Press the TX button on the outdoor sensor to transmit RF signal.

Keep the outdoor sensor 5-10 feet from the forecast station.

When RF connection is established, the temperature will appear on the station. Allow the
outdoor sensor and weather station to sit together for 15 minutes to establish a strong
connection.

Posted on Oct 16, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: La Crosse atomic clock model #WT-3143

don't push any buttons at all untill the clock has at least 15 minutes to communicate with the transmitter.

Posted on Feb 17, 2008

Anonymous

  • 1 Answer

SOURCE: Wireless thermo clock not reading outside temp

I've had a similar problem with another model, an Oregon Scientific Model IWA-80055 Wireless Thermo Clock, in which when I replaced the batteries in the remote sensor, the clock would not read the temperature from the remote sensor.
I found it fairly consistent to solve this by taking a battery out of place in the clock and putting it back in.  Unfortunately this also messed up the clock's time and date.  This is also in the instructions catalogue for the device, check and see if yours gives a similar solution.

Posted on Apr 13, 2009

Anonymous

  • 1 Answer

SOURCE: I have a barolo atomic clock, batteries went

Make sure the day is displayed instead of seconds, then homd down the + button for 5 seconds. Every 5 seconds should advance it on zone. Had same problem and just got done resetting mine this way.

Posted on Jul 17, 2009

Anonymous

  • 1 Answer

SOURCE: my clock is nort showing up the outside tempertute

Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

Posted on Nov 23, 2009

Anonymous

  • 1 Answer

SOURCE: Need instruction for setting clock model # 38229-1

Setting timezone: Enter alarm time preview, by pressing "Mode". Press "Adjust" to change time zone.
Setting time: When previewing time, press and hold "Alarm on/off" Until time blinks. Press "Adjust" to change time; Press "Alarm on/off" to change to minutes, ect. Press "Mode" when done.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

La Crosse Model W86111, Setting


an atomic clock ........ no user manual ?

1 Digital Atomic Wall Clock Model: W86111 ' Quick Setup Guide

pdfstream.manualsonline.com/0/0a0678fd-f9df-4e8f-8c98-0b4794c5453c.pdf

User-Manual

content.etilize.com/User-Manual/1031159306.pd


26317196-dz0hez40bltko3jrerxnoz1i-3-0_0.jpg

Oct 19, 2016 | Home

1 Answer

How do I set my sharp atomic clock. Put in new batteries and set time and date on back of clock but the outside temp is not registering?


That makes scence, you have to have an outside temperature probe. If it is wireless it also needs batteries. Check manual for more details.

Nov 07, 2014 | Sharp Atomic Dual Alarm Clock Spc315...

2 Answers

Can't get outside temp on my atomic clock


If you still have the instructions read up on pairing the transmitter to the clock. You'll need to do that every time you change batteries on the outside transmitter. If you don't have those instructions , go to the clock's web page to get the manual for your model of clock.

Sep 23, 2014 | Home

1 Answer

How do i get the outside temp. to work


If you have a outside sensor add betteries.Wait for it to connect to the base. You may have to "reboot" ,remove batteries from base and outside temp sensor and replace both, Patiently WAIT I have a similar device and once a year I replace the batteries It takes a while for the devices to re-connect and set , the atomic clock as well. That said, How far is the Temp Sensor from the base unit? I set my outside sensor near the base to connect and move it on th outside porch (30' away) out of the direct sun and rain. I not sure if this is necessary but that the way I reset them.

Nov 04, 2012 | Sharp Spc315 Atomic Dual Alarm Clock

2 Answers

We replaced the batteries on our SIO SCAN temp transmitter but it still will not register the outside temperature--what do I do?


Take the batteries out of the clock AND the temp transmitter. Wait about a minute, then replace the clock batteries. Wait another minute, then replace the transmitter batteries. Once the clock synchronizes with the satellite, you will need to set the time zone and whether you want DST on or off.

Dec 08, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

My clock is nort showing up the outside tempertute


Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

Nov 16, 2009 | SkyScan 86709 Atomic Wall Clock

2 Answers

The outside temp sender won't work. We put new batteries in it, but it does not send a signal. It will not put an outside temp on the clock.


Simple, the instructions state that when changing the batteries on the outside temp. sensor, you must also change the batteries on the main clock unit. I had same problem when I changed the sensor batteries until I pulled the batteries from the clock and it reset fine. ( Sensor batteries first, then clock batteries. ) The clock will reset to atomic time overnight so don't worry if it doesn't read correctly at first.

Aug 18, 2009 | SkyScan 86709 Atomic Wall Clock

2 Answers

Outside temp on skycam atomic clock


Try changing the battereis in the CLOCK. When the batteries in the clock start getting low, the clock does not pick up the outside transmitter.

Nov 10, 2008 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Changed batteries


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 07, 2008 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
Home Logo

Related Topics:

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

687 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...