This is a touchscreen problem. If you would like more details on the problem please contact us on [email protected]
SOURCE: Janome MC 9000 off touch screen calibration
Thanks guys
I remembered the fix!!
On the Janome MC 9000
To calibrate the touch screen
1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.
Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA
SOURCE: janome 9000 refusing to start
I'll bet it's the fuse. I had the same problem about a year ago.
SOURCE: I have a Janome mc
This Replacement LCD Touchscreen is suitable for your Janome Memory Craft MC9000
Janome Memory Craft MC9000 Replacement LCD Touchscreen
156 views
Usually answered in minutes!
×