At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How to reset to factory default Dell 1720 network printer
I use a lot of dell laserjet 1710 and 1720 network printers.One was configured to static IP-Address and connect to the network.I have no problems to PINg from any my Lan, but I cannot Telnet, HTTP, dell printer utility do not recognize printer. Help me how in this situation can I reset printer to factory default.
2000 times thank you Alex
Re: How to reset to factory default Dell 1720 network...
1. Turn off the printer 2. Open the front cover. 3. While the Continue and Cancel buttons are depressed, turn the printer on. 4. When the error LED on the control panel is lit solid, close the cover.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Any time an imaging drum is replaced on a 1700, 1710, or 1720 model dell laser printer, you must reset
the photoconductor count. The following procedure illustrates how this is done:
1. Open the front access cover
2. Press and HOLD the Cancel Button (Red X)
3. When you see the LED's 'Chase' turn the printer off
4. Close the access cover, and turn the printer back on
5. Press the Continue Button (Green Triangle) to print a settings report
6. Under the section 'Cartridge Information', locate the item 'PHOTOCONDUCTOR COUNT=0K' indicating 'Zero Thousands'.
s now been reset, and you should now be able to print now ok
Go to the "Resets" menu and select the "RESTORE FACTORY SETTINGS" selection. This will revert your machine to the condition that it was in when it came from the factory. Remember, the default for networking is DHCP, so once reset and online, you could use the web interface to configure it further.
Via the Control Panel:
The Resets menu makes it possible to reset factory settings, disable and enable Powersave, and update the printer after new supplies are installed.
Configure device menu
The Configure device menu makes it possible to change the printer's default print settings, adjust the print quality, change the system's configuration and I/O options, and reset the printer's default settings
RESTORE FACTORY SETTINGS :Makes it possible to clear the page buffer, remove all perishable personality data, reset the printing environment, and return all default settings to factory defaults.
Press Menu or (Select) to enter the MENUS.
Press (Down Arrow) to highlight Configure device menu .
I Open my browser....I signed in to my router as administrator .... Mine is 192.168.1.1 .... I went to status in my router .... Then to local network .... Then to DHCP Clients Table .... This is how I found what printer address the was.... Then I typed the printer ip address into my browser Mine happened to be 192.168.1.105 .... Yours will probably be different....That got me to the 1720dn printer menu ....I clicked on Configuration .... I clicked on Print Server Settings I clicked on TCP/IP I clicked on Set static IP address. I changed IP address from 192.168.1.105 To 192.168.1.125 and Submit....Now you can get to the printer menu at 192.168.1.125
Go to run.... Printers & Faxes Right click on Dell laser printer 1720dn Properties. Ports .... Add port .... Double click on Dell Enhanced TCP/IP .... I named the port My dell laser 1720 dn....Where it said enter a single IP address or host name I entered the new address 192.168.1.125 the clicked OK ....
Right click on Dell laser printer 1720dn Properties....Ports Choose your new port ....
This could be a hardware problem, but likely it is a driver or default configuration problem.
If this printer is hooked up to the network and you print to it through a print server, the default print setup or driver could be incorrect or misconfigured.
Whether it is hooked to a network or not, check to be sure the driver is correct under the printer's properties.
Also check to see if it's default settings are set for it to print only in black and white. Both can be done through the printer's properites.
it's in the menu, under settings. reset to default and then power cycle it again...sounds like your memory is a bit corrupted(comes from power glitches)
reset dell 2130cn to factory defaults
×