Heres how.. hold source button down until radio turns off and clock is visable. nexst hold audio button down untill clock starts to blink. audio btn is top right hand button next to arrows. next choose hr or min and use up arrow to go up and down to go down
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d
SOURCE: setting clock radio
Press and hold down the "clock" button. You should see your time start flashing. Normally you set the time with the volume or channel control. Check which control lets the selector jump from "hou" to "minute and set the minutes. To exit setting menu, depress "clock" button again
SOURCE: no audio on my pioneer super tuner d eeq mosfet 50
the amplifier inside the unit has failed.
you can verify by hooking up an amplifier and using the RCA jacks for your signal.
If it works - the radio's internal amplifier is in need of repair.
Something will have caused the problem - so in the meantime - check the speakers for shorted wiring or burned voicecoils.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
SOURCE: How can I hook up an ipod to a EEQ Mosfet 50WX4
How can I hook up an ipod to pioneer mosfet 50wx4? i cant get the aux function to show up
SOURCE: need a user manual for mosfet 50 Wx4 pioneer in da...
this wiring has different color of wiringneed. need right colors of power and negative wire to conect stero.
1,205 views
Usually answered in minutes!
×