Need to know how to set values on 17.5 stanley mower

Is tranny and various speeds working properly? How about the throttle control? Do you have it set for higher speed?

well should of mentioned the model number that you too can goggle

Dealer visit

10-17-12

Copy following link, and scroll down page, to help identify same/similar timer and download outdoor timer manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#outdoor

Or add comment with clear description of timer, saying how it differs from timers shown on link above.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

its getting fuel to the carb but is the solenoid working on the bottom of the carb they stick and also safety switches go bad and kill the power going to it

I need owners manual for a stanley riding mower MOD# 425605X692A
where can i get a free down load . thank you jesse.

these planes were made by stanley from 1876 till 1947, it is about 7 1/2" long and cutter is 1 5/8" wide, it is virtualy exactly same as stanley 110, but it has blade raiser installed.

most popular are models without star and these are valued at anything between $20 to $80, depending on the condition, if with original box, labels, they are about double the price.

6 star model, second most popular, is not exactly rare but value can be between about $50 to $250

5 star model, it is rare, if complete, its value is between $300 up to $800, it differs in that that it have raised front end knob receiver

original price was $1. and for another $1 you will receive dozen blades...

i hope this help you?

if you are satisfied with my answer, please do not hesitate to leave comment and give me your vote4, thanx!

Stanley Mowers were made by Murray. Most Lawn mower repair / parts stores have replacement parts for these mowers.

Even if you do not have a model number you can probably use this link (left side of page) to find your part.

http://www.outdoordistributors.com/Murray/Murray_Pushmower/Murray_Pushmower.html

If it is just an engine part that you need mose of these had Briggs and Stratton engines onthem and the engine model number and type code are on the air shroud just above the spark plug for engines 4 HP or less.

i believe it was made in 2003

i have a stanley lawnmower 19hp 2003 year where can i purches parts for it need carbs for it.cannot seem to find inything on line.