Washing Machines Logo

Related Topics:

A
Anonymous Posted on Aug 04, 2017

Dear friends I have Super General washing machine, it's showing error E61. I restarted machine several times but results it's same error E61. Please help me for solve this issue. Thanks

5 Related Answers

Anonymous

  • 641 Answers
  • Posted on Aug 16, 2007

SOURCE: error codes for indesit front load washing machines

The F002 error codes relates to a motor problem. Do you know if the motor spins ?

Ad

Anonymous

  • 1294 Answers
  • Posted on Dec 05, 2007

SOURCE: Zanussi ZWD1471W Washer Dryer error codes help please!

Click on Zanussi (below FIXYA) on this website, type in your model number & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, voila! u hv your manual on line. And dont forget to rate me, on this great site.

Alun Cox

  • 2679 Answers
  • Posted on Sep 18, 2009

SOURCE: PXE-E61 media test failure check cable

Your unit is telling you that there is a cable problem (between HDD & MoBo) try a new one or if you have another drive with same cable swop over.

Anonymous

  • 5 Answers
  • Posted on Oct 11, 2009

SOURCE: My washing machine is SANYO ASW-90WRTP. showes E4

Check on the machine there is a schamatic and it has error codes on it. it may be on the in side panel.

Testimonial: "cool thanks for that just empty the tub then will check for skidmatics"

Anonymous

  • 22 Answers
  • Posted on Nov 23, 2009

SOURCE: Kyocera FS2000-D error message 7410:0017578

The drum is not pushed fully into the machine.Open the waste toner container door and gently push all units into the printer.Then turn off the printer at the wall.When you power back up the printer should be back to normal.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Super General Washing Machine. E3 and F8 which error on the washing machine?

Question edited for clarity.

E3 is a generic 'Off Balance' code

If you receive an E3 Error code, your washer may be unbalanced. This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle. Stop the spin cycle.

E3 - Error Code - Stacked Laundry Center - Whirlpool Canada

F8 is taking too long to fill. Check the filter screens on the rear hoses.

The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Aug 21, 2023

F8 E1 or LF or LO FL Error Code in Display - Washers - Amana

..
0helpful
1answer

Super general washing machine continue pump running and show e12

The error code E12 on a Super General washing machine indicates a drainage issue. This could be caused by a few different things:
  1. Clogged drain hose: The drain hose that carries the water from the washing machine to the drain may be clogged. Check the drain hose to make sure that it is not blocked by debris.
  2. Drain pump: The drain pump is responsible for pumping the water out of the washing machine. If the pump is clogged or damaged, it will not be able to pump the water out and the machine will display an E12 error.
  3. Drain filter: The drain filter is located in the drain pump and is responsible for trapping debris that may clog the drain hose. Check the drain filter to make sure it's not clogged.
  4. Control board: The control board manages the washing machine's functions and if it's faulty it can cause the drain pump to run continuously and display the E12 error.
It's recommended to first check the drain hose, drain pump, and drain filter to see if they are the cause of the issue. If these are all clear, the problem may be with the control board, which will require professional repair. Please be careful when checking the drain pump and filter, as the water may be hot if the machine is in the middle of a cycle.
0helpful
1answer

Super General 7 kg fully automatic Top-Loading Washing Machine SGW-721. It has E error on it.

Question edited for a bit of clarity.

This doesn't appear to be a General Electric (GE) machine and looks to be an Arabian machine. We are in North America. This link might work better for you in your county.

https://www.google.com/search?q=super+general+automatic+washing+sgw721+e+error+code

..
0helpful
1answer

I have super general washing machine 7kg top load showing error code e3

e3 mean to much water in washer,check inlet valve, are call a techicain to solve your problem
0helpful
1answer

MY Super General SGW 1201 IS showing E01 error stops working, once I open the door and shuts it continues, its coming as and when

you can google you super general swg 1201 E01 error for instructions to trouble shoot. or try you tube.
0helpful
1answer

Super general SGW8100(S), what is meaning of error code E61?

think its Insufficient heating (maximum time exceeded).

Possible fault Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty.
Machine Status/Action Cycle paused.
0helpful
2answers

Error 2 super general washing machine

I have super general washing machine model is sgw 620 this machine coming error E5
0helpful
1answer

Zanussi 1200 stopping on drain and not emptying showing error e61

Problem in heating phase. Could be heating element.

Dado
Not finding what you are looking for?

119 views

Ask a Question

Usually answered in minutes!

Top General Washing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

How-2-Repair.com
How-2-Repair.com

Level 3 Expert

746 Answers

Are you a General Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...