Blank screen, flashing keyboard, confusion

try a new battery

Try to take the battery out and put it back after 20 minutes later. Issue might be software related too. If software issue re-flashing will resolve the issue.

Good Luck

I bought this cell phone off ebay thru a hong kong dealer what a mistake. This is the second phone they shipped me but not without extra expense for me and now this phone screen went blank in 1 day after receiving it. I just plan on sending it back and filing a complaint on ebay.

Just beware!!!!!!!

Seems like these cell phones need to be RECALLED.
Thanks

Hello secoleman,

I'm sorry to hear about the bad news. Unfortunately Razor phones are notorious for having malfunctions (hardware failure).

Your screen has been damaged, any number of things could have happened from just a manufacturing defect or sitting on it, dropping it the list goes on.

Basically you will want to get a new phone as there is not much you can do about it. When you replace your phone you can take the sim out of the one you have now and can put it in your new phone.

Post back if you have any more questions, Thank you for trying Fixya!

hae dont do any thing you have a new ph so contact your service sentre

ale - take the phone and try a new battery if that does not work then you need to have the phone looked at by a repair shop adn diagnose the problem for you.

raj+ GUEST + Littledude + Johnna - the flexcable need to be replaced on the phone.

Try taking your battery out over night and let it sit..then in the morning put it back in and see if that cures the issue.

ok... I thought that might have happened. Good luck with the claim. Let us know how it went. Really, he should be the one trying to contact the other user. That's just good business practices. After all, it was his mistake, not yours.

- Jim

i tried some electrical contact cleaner (brake cleaner WAL-MART .89 cents) on the hinges. Open ti back and forth several times. NOTE: do not spray alot, just a little at a time. Then it got squeaky and started working. Then I sprayed a little WD-40 on the hinges and it works fine.

change the ribbon(flex) cable.take it to technician.common problem with v3 and v3i