I connected the stereo in my car about a year ago and I put a code on it, now that I want to change the stereo into my pick up, it is asking for the code and I cant remeber it. I tried many but I can't seem to get the right one.Would any one know if I could reset the code and how?
I have a kenwood ddx 7015 and need the lock code....I took the radio out of my truck and wanted in my car but it locked up and i have no memory what the code was....PLEASE HELP
i have the same problem!! i remove the battery for 5 minutes, press the reset button , powered it up but still asking for my passcode. I wonder if you resolve your problem, if you do please , share it with me. thanks,,
levnabi have the same problem!! i remove the battery for 5 minutes, press the reset button , powered it up but still asking for my passcode. I wonder if you resolve your problem, if you do please , share it with me. thanks,,
levnab
AnonymousSep 01, 2008
I've entered every code I can think of, disconnected the power and it won't reset.I've entered every code I can think of, disconnected the power and it won't reset.
I purchased to ddx7015 from a friend. He did not have the remote or the code. I have since purchased a remote for it now just need the reset code and instructions how to reset it.I purchased to ddx7015 from a friend. He did not have the remote or the code. I have since purchased a remote for it now just need the reset code and instructions how to reset it.
AnonymousDec 15, 2008
**** i´ve got the same problem at my DDX6027. So what the f++k should i do. i think there is definitely a solution by pressing buttons in a specific row. Can someone tell me that. I know it for other DDX and DPX but not for my 6027 :-(**** i´ve got the same problem at my DDX6027. So what the f++k should i do. i think there is definitely a solution by pressing buttons in a specific row. Can someone tell me that. I know it for other DDX and DPX but not for my 6027 :-(
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you bought the car new than it is a code that you entered if you forgot the code than you have to have it reset by a dealer if they can still do it. if you bought the car new and never entered a code than call the car dealer and ask them for the factory setting for your year and make and mode;.
Unfortunately Kenwood codes are only available from the Main Dealer or
by using a Radio Decoding Service who will connect a laptop to read the
working code inside your radio`s memory chip (EEPROM)
Not familar with your car but I had same problem many years ago with a Vauxhall Astra and did same as you, disconnected battery and re-connected, radio didn't work - but my display kept flashing for security code to be re-input, which I didn't have.
Yours could be the same if radio not worked since disconnection - solution: if you dont have code & not in any documentation you got with car, then the radio will need to be re-coded by a dealer (expensive) or enquire with local car spares shops - they normally know a cheaper source. Mine cost about £18 (5 years ago) to get re-coded & I had to remove & reinstall myself.
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
Please rate ne FixYa for this solution. Good Luck :)
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
I HAVE THE SAME PROBLEM
i have the same problem!! i remove the battery for 5 minutes, press the reset button , powered it up but still asking for my passcode. I wonder if you resolve your problem, if you do please , share it with me. thanks,,
levnab
I've entered every code I can think of, disconnected the power and it won't reset.
I purchased to ddx7015 from a friend. He did not have the remote or the code. I have since purchased a remote for it now just need the reset code and instructions how to reset it.
**** i´ve got the same problem at my DDX6027. So what the f++k should i do. i think there is definitely a solution by pressing buttons in a specific row. Can someone tell me that. I know it for other DDX and DPX but not for my 6027 :-(
×