SOURCE: programing for uniden bearcat scanner bc 144xl
danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
http://www.radioreference.com/apps/db/
Hope this helps you out, let us know,, Mechanic
SOURCE: I have a uniden ubc73xlt handheld scanner,can't
Try a master rest:
If the scanner's display locks up or stops operating
properly, you might need to reset the scanner.
Caution: This procedure clears all the information
you have stored in the scanner. Before you reset the
scanner, try turning it off and on to see if it begins
working properly. Reset the scanner only when you
are sure it is not working properly.
1. Turn off the scanner.
2. While holding down 2, 9, and Hold, turn on the
scanner. It takes about 3 seconds to initialize
and CLEAR appears.
SOURCE: looking for a BC72XLT handheld scanner manual
This link at the bottom should work. If not go directly to uniden's web site www.uniden.com and there is a place to get all their manuals
http://uniden.com/pdf/BC72XLTom.pdf
SOURCE: how do you reset a Uniden BC72XLT handheld Scanner
To completely clear out all stored frequencies.
1. Turn off the scanner.
2. While holding down 2, 9 and hold turn on the scanner. It takes about three seconds and you will see the word clear.
SOURCE: I need to program my uniden handheld scanner.
Go to uniden.com and look in customer service/manuals. You will need the model #
170 views
Usually answered in minutes!
×