I'm with optus, and was sent a speedstream 4200. Then the on/off button broke. Got a new speedstream 4200, and the ethernet and dsl lights are on, but no activity. There is a connection, but cant view web pages.
Ethernet and DSL lights are indicating you have ADSL available on your line, and that you have computers connected to the router.
What has probably happened is that Optus did not set up the new router with your username and password. Go to thw following website for details on how to setup the modem.
http://help.optuszoo.com.au/help/dsl/connected/windows/optus_modems/speedstream_4200
Manual Modem Settings
The Optus DSL Broadband self-installation CD configures all the necessary settings for your DSL Broadband service. You do not need to manually configure your modem if you have run the self-installation CD. While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.
The Siemens SpeedStream 4200 ADSL modem can use either USB or Ethernet to connect to your computer.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service:
top
PC Settings
Step by step instructions are provided for each of the supported Windows operating systems:
top
Configure Your Modem
To configure your modem settings you must now access the configuration manager using your web browser. This is done by entering the IP address in the address bar of the browser window as follows:
Note: If you are updating the password in your modem, please complete steps 1 to 3 only.
Step 1 of 5
Step 2 of 5
Step 3 of 5
Step 4 of 5
Once the modem has rebooted and the ADSL connection has been successfully established the DSL LED indicator will light steady green.
Your modem is now connected to the Optus DSL Broadband service.
1,207 views
Usually answered in minutes!
×