Boating Logo

Related Topics:

Haseeb ahmed Posted on Apr 17, 2017

Intex mariner 4 motor mount kit is able to hold 4hp Yamaha outboard or can I customize the kit ?

4 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jan 05, 2009

SOURCE: what is the correct fuel/oil mix for evinrude 4hp ?

the proper mix is 50 to 1 or 16 oz to every 6 gallons,in my little boat I put 4 quarts in the 48 gal tank and its been running for 22 years,your running way to rich and your plug is probaly fouled,take it out clean it up/dump your fuel and mix it right,thats a great motor you got,I hunted with it for years,oh yeah when you get started run it till all the smoke is gone or you will have carb problems ,if you dont have them all ready,a little carb cleaner wont hurt but get it running first,or all that trash will foul you out,have a great trip bartriley1

Ad

Anonymous

  • 207 Answers
  • Posted on Jun 27, 2009

SOURCE: 1999 Mercury Mariner 9.9hp outboard motor

should be on the side with a lever but could you give me more info please

Anonymous

  • 2 Answers
  • Posted on Dec 08, 2009

SOURCE: Can Intex mariner 4 carrie an engine Yamaha 8 HP

no. my 28 lb 3.5 tohatsu strains the pvc material that the tubes are made out of pretty well. the weight and thrust of the motor pulls pretty hard on these tiny little rubber "feet" glued to the tubes. I usually dont even run full throttle as it looks like i will pull the motor mount feet right off the tube. I couldn't imagine a bigger, heavier motor than what i am running working out well in the long run.
i have the intex mariner 4, btw.

Anonymous

  • 1 Answer
  • Posted on Jan 14, 2011

SOURCE: Looking for a gasket set for my 1988

top gasket kit pt. no. 3L663D

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

How to find model number on mariner outboard 4hp 2stroke engine

Hello,

Mariner 4hp are identical to Yamaha engines.
You should find a sticker on the port bracket with serial and model number.
If that sticker has disappeard, an aluminum piece is stamped in the side of the cilinder. The numbervstamped in that round pieceis the serial number. I can convert that serial number in a year/model number...
0helpful
1answer

How do i replace shift lever on a mercury 6hp 4 stroke

shift lever has a bolt in it and shift rod you need to remove powerhead complete to access also remove gearbox !
0helpful
1answer

Yamaha 4 hp outboard steering friction swivel screw does not work

That's a current problem.
OR the screw is rusted in place. So then use WD40 or eqivalent to free the screw.
Or the parts inside are worn. Remove the friction screw. Then, remove the 4 bolts holding the swivel cap. Remove the entire engine from the swivel to prevent it fall on the ground. Replace the worn parts.
0helpful
1answer

Yamaha 4HP outboard - cannot pull starter cord - jammed.

Engine or gearcase seized...
Remove the recoil starter ( 3 bolts and the startingear link)
If you can turn the flywheel slightly: Gearcase seized
If you can't turn the flywheel at all: Engine seized.
In both cases: If you can't disassemble and have the job done yourself, forget that motor...
2helpful
1answer

Is it compatible 3.5 HP engine with the boat? (mariner 4) if yes , when i used %30 of power just alone back side go down and can not control properly . engine is TOHATSU M 3.5 S

Your motor is too large.

For the Intex Mariner 4 Intex recommend an absolute maximum of 3HP (2,2kW) and the motor must not weigh more than 40lb (18,2kg).

Those limits assume that you are using the Intex motor mount kit (Part No. 10658) and that the boat is correctly loaded and inflated.

In reality and from experience I would personally recommend 2HP maximum power and to keep the motor as lightweight as possible. Although the Intex Mariner 4 can take a motor mount, it's really a rowboat and is not suited to using a motor for extended periods, but just as a convenient tender to a larger boat it's fine.
1helpful
1answer

Can Intex mariner 4 carrie an engine Yamaha 8 HP with a modificated mount if the engine have 60 pounds?

no. my 28 lb 3.5 tohatsu strains the pvc material that the tubes are made out of pretty well. the weight and thrust of the motor pulls pretty hard on these tiny little rubber "feet" glued to the tubes. I usually dont even run full throttle as it looks like i will pull the motor mount feet right off the tube. I couldn't imagine a bigger, heavier motor than what i am running working out well in the long run.
i have the intex mariner 4, btw.
Not finding what you are looking for?

251 views

Ask a Question

Usually answered in minutes!

Top Intex Boating Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

jws1013

Level 3 Expert

1713 Answers

Kardoc

Level 3 Expert

7503 Answers

Are you an Intex Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...