The "fork" presents a curved slotted face, this part is black plastic, about 4 inches long, the only marking on it is ">PC<"
SOURCE: fantom twister 500DX
Take off the bottom plate (where you would access the belt). Put the wheel
back on, put the screw back in the wheel and looking from the underside
of the vacuum you can see the screw. You need a bolt and preferably a
lock washer and that should hold it for you.
SOURCE: I need a wiring diagram for the fantom fm760
Hello, carl
I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my own personal time to see if I can help. Even though this a Informational site may not have your exact model or brand, But this site will help you a lot. Here is the site link about everything you want to know about vacuum cleaners and possibly yours, from repair to trouble shooting it.
http://home.howstuffworks.com/vacuum-cleaner.htm
Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help, I would appreciate it. Like I said I just tried to help, If anything this is good information for future problems. If you felt that my free help was a waist of time for you, I'm sorry.I do not get paid to help people on the site, I do it cause I like to help.
Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.
Thanks, Mike
http://beta.fixya.com/users/mc1bean
124 views
Usually answered in minutes!
×