My handycam screen has a white screen I am not able to see anything on it

Hi ! No I think you need a new LCD sreen ! But I think a new Camera
is more efficient and cheaper !

It sounds like you may need a new LCD screen or lens. I'm having similar problem with a white LCD screen on a Canon camcorder, but it still records video, I just can't see what's in the frame or access menus. Does yours still record video? If so, it is the LCD screen.

The ribbon cable that connects to the main board is loose. Open it and re-seat the ribbon cable.

The touch screen portion of your lcd panel is working correctly but the panel isnt. The panel needs to be replaced and 9 times out of ten the cable does as well. I hope this helps.

Lens cover or cap is not open ?

I have the same problem with a DCR-HC45.The culprit is the ribbon between the circuit board and the LCD display,but my problem is worse,sometimes the screen turns white and I can't see anything on it.I have no idea from where to buy a replacement ribbon but I know how to replace it.

check whether can see the picture through vew finder,if yes replace srtip wire from main board to lcd bord

I do not see any mirror either in lcd section of your Sony DCR-DVD101 camera as you can see in below picture.
Please let me know your problem with details.

For the "all white screen" in daylight problem, check to make sure the "Nightshot Plus" slider switch is set on "off."

Hello, the special flat cable connecting LCD panel with main board is broken. If you want I can supply you with further info (part number, etc.) at LIVE Expert Assistance. Best regards, Arpi