Time change on Pioneer car radio

Pioneer Manual

https://www.google.com/search?q=Wiring+for+Pioneer+DEH+S31BT+CD+player

Dodge wiring

1999 Dodge Ram Pickup Car Stereo Wire Colors and Locations

https://www.the12volt.com > installbay > stereodetail
1999 Dodge Ram Pickup Stereo Wiring ; Right Front (-), Dark Blue/Red ; Rear Speakers, 5 1/4" Side Panels ; Left Rear (+), Brown/Yellow ; Left Rear (-), Brown/Light ...

1999 Dodge Ram 1500 Radio Wire Guide - MODIFIEDLIFE

https://www.modifiedlife.com > 1999-dodge-ram-1500...
Our 1999 Dodge Ram 1500 radio wiring diagram shows you all the radio wire colors and what they do. Table of Contents. 1999 Dodge Ram 1500 Radio Wiring Diagram ...

..

check behind radio for inline fuses . useually on red and yellow wire's . most likly blew one . or fried radio all together . most likely just fuse , thats why they are there

hi
Its your clutch release bearing.
change the clutch
3 piece clutch kit. (pressure plate + clutch plate and release bearing)
your problem will be fixed.
hope that helps

yeah i can help you out but i need to know year, make, and model and if the harness from the factory radio is intact or cut from the vehicle.

With power OFF, press and hold the FUNC (or CLK) button until the date and time are displayed. Use the up/down/left/right control to set numbers and change positions....when happy with date and time turn unit ON..should be good to go.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_aad3edb7dfa380b9

turn off the radio then press the clock button. now pressing for about three seconds the function button then the clock should appear on the screen.

For most Pioneer single CD players, you can set the clock using the following steps:

1. Press and hold the SOURCE button until the unit turns off.
2.Press and hold the FUNCTION button, until display pops up, then release.
(If you do not have a FUNCTION button, then push the AUDIO button)
3. Press the FUNCTION button again until the clock shows on the display.
4. Press the UP and DOWN buttons to adjust the hours.
5. Press the LEFT or RIGHT arrows to move to the minutes.
6.Press the UP and DOWN to adjust minutes.
7. When complete, press the SOURCE button to exit.

• 1 year ago

Turn the raido/cd player off. Hit the clock button. Time will display. Press and hold down the audio button for 4 seconds. Use the arrow keys to change time. Press and hold the audio key when finished until the time is done flashing.

Contact Tech Support for Pioneer. They have a call back on the Flex Cable which is the source of all your problems. It took 2-3 weeks for the repairs. Although, now I have a problem with the screen rolling out.