Creative Labs Inspire  T3030 Computer Speakers Logo
Posted on Jul 23, 2009

No sound from creative t3030 2.1 speakers

I have had no sound coming out of these speakers for a long time.
1) This is nothing to do with computer drivers, the speakers don't work with anything: my mp3 player the computer... nothing
2) The creative t3030 speakers system has a handheld volume remote which can control volumes and power, and it also has a headphone jack. If i plug headphones in there the system works.
3) The two satelites work fine when connected to a different system.
4) The subwoofer takes the input and sends output to the satellites so the problem could be there. The wired remote also goes to the subwoofer as well as the power cable.
5) I hear nothing, no crackling or hissing or anything.
6) The fuses have been checked

My diagnosis was that because the headphone plug works, something called the switch contact (which cuts out the speakers once headphones are plugged in) within the plug may be broken.
I do not know how to fix this.
However I could be wrong
Any help would be very useful
Thanks

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 19 Answers
  • Posted on Jul 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jun 25, 2009
Answers
19
Questions
0
Helped
7102
Points
33

You checked adapter light the green light is show

Wil Christensen

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 25, 2019
Wil Christensen
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 25, 2019
Answers
1
Questions
0
Helped
1673
Points
1

I have a t2900 and i have no sound at all... not even through headphone jack is my control pod to blame? The green indecator light flickers and or goes of if i wiggle the power knob

Ad

1 Related Answer

Anonymous

  • 231 Answers
  • Posted on Jul 24, 2009

SOURCE: No sound from creative t3030 2.1 speakers

the circuit board and amplifacation supply inside the sub are blow or shorted out.thus preventing any sound. the head phone jack works only because it is a bypass feature supported by the actual computer not the surround sound unit

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Creative Inspire 5200 system won't work

Hi. Check your speaker system with a different audio device like iPod or any MP3 Player using the same jacks. If the speaker system gives out sounds then nothing is wrong with it... if no sounds come out, then you know what I mean...

Try to replace the speaker of your sub-woofer... maybe that can fix it!

^_^
2helpful
1answer

My creative speakers woofer is damege plz repair woofer.

sir I am using 2.1 creative inspire speakers system, at present no sound is coming in the speakers or woofer, what is the problem.
power is on and after connecting the speakers to woofer from pc no sound is coming. what is the problem. please help me. thanks rajanna
0helpful
1answer

No sound from creative t3030 2.1 speakers

the circuit board and amplifacation supply inside the sub are blow or shorted out.thus preventing any sound. the head phone jack works only because it is a bypass feature supported by the actual computer not the surround sound unit
0helpful
1answer

Creative woofer prob.

no software for that creative. change the amplifier IC inside woofer which is the out put of all speakers.
0helpful
1answer

Static from speaker

Try playing around on the volume control panel. The pan might have been played with, along with other things.
1helpful
1answer

No sound from Creative Labs Speakers- Please help

to localised your problem, try to plug your speakers to other sound source like mp3 player ,stereo system. if still no sound coming from it,your problem is within the speaker system. perhaps the audio power amplifier ic inside, need to be replaced.
0helpful
1answer

Front Right Signal to Front Left Speaker

It is a problem with mixing sound, DX9, or CMSS for 6.0 speakers, try reseting the creative diag. or change the PCI card on another slot.
1) verify connectors.
11helpful
4answers

I have a creative 4.1 Speaker system but only Front speaker seems working???????????????

I have 4.1 creative speaker but only front 2 speaker will work

so i have connected convertor ie,2 output and 1 input then i connected to the green port so all the speaker are working.

Gowrish
0helpful
2answers

Volume diminishing

Try other speakers with the card.
Most speakers have an amplifier built-in them. Most of the time they go slowly, which may be the case.
0helpful
4answers

Help needed for speakers

lo-ve stated: but i cant still get to it in my windows system1.gif and sound options. But there's nothing there.

If there's nothing there your computer can't find a sound card!

blue
Not finding what you are looking for?

1,683 views

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...