Samsung LE40R74BDX 40 in. LCD Television Logo
Posted on Nov 20, 2007

Samsung LE40R51B no picture but turns on

Hello experts,

my Samsung 40'' LCD TV turns on and swiches channels, plays sound, but does not show any picture. You can see the background light. But its black all the time. What can be the problem? some electronic in the LCD or could be the LCD panel faulty?

regards

Simon

  • clean_cut_05 Apr 07, 2008

    I have a samsung 40" lcd to and it turns on for about 9 sec then the screen goes blank. The tv stays on but no picture, then if i turn it off and back on again it works again for another 9 seconds. What do you think this is?

×

3 Answers

Zahar Timoshenko

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Nov 24, 2013
Zahar Timoshenko
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 24, 2013
Answers
1
Questions
0
Helped
1133
Points
1

Tcon is dead replace it
Tcon module # 400w2c4ltv0.1

dndmusic

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Greenhorn:

A rookie expert who has answered 20 questions on their first day.

  • Contributor 23 Answers
  • Posted on Apr 04, 2013
dndmusic
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Greenhorn:

A rookie expert who has answered 20 questions on their first day.

Joined: Apr 04, 2013
Answers
23
Questions
0
Helped
4043
Points
70

Try to replace CAPACITORS with value 1000uf 25 volts, replace them with 1000uf and 35 volts, the power supply overcharges the capacitors due to powerpeaks of 29.7volts, the priginal capacitors cant handle those peaks,.. in the menu turn off options dynamic contrast and digital noise filter and all is fine again! it worked on my samsung.
Yours sincerely,

Dennis

  • dndmusic
    dndmusic Apr 04, 2013

    try to replace CAPACITORS with value 1000uf 25 volts, replace them with 1000uf and 35 volts, the power supply overcharges the capacitors due to powerpeaks of 29.7volts, the priginal capacitors cant handle those peaks,.. in the menu turn off options dynamic contrast and digital noise filter and all is fine again! it worked on my samsung.
    Yours sincerely,

    Dennis

×

Ad
A

Anonymous

I have the same problem i was told by a repairman that samsungs are known for bad psu. and that its expensive to repair

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

What do you think is wrong with my television, it has sound but no picture. How can I fix the problem?

Hi there
I would go to menu on the remote , from there to picture go down the list, if you do not find anything there to help you. Go to Support and to the E manual .
26053790-x3zeawgeewbvgdzeyuixqaom-4-0.jpeg Kolbrun
1helpful
3answers

How do I fix my Samsung 40 LED TV that has sound but no picture?

Here is what to check when your TV is turned on, power light is ON, but no picture is seen or sound is heard:

1 - Be sure the component you are using (Xbox, Cable, SAT, ROKU) is turned ON.
2 - Check to be sure all cable and cords are securely connected to the TV inputs and component outputs.
3 - Make sure you are on the correct input as some TV's will show a black screen if there is nothing connected to that input.
4 - Unplug the input you are trying to use from the TV (such as an HDMI Cable) and plug it back in.
5 - Check for signs of damage on all cords and cables from the TV to all components.
6 - Make sure the TV is not in ENERGY SAVE MODE, press the button on the remote control to go back to normal mode.
7 - Unplug the TV for 10 minutes to see if there was a temporary one time issue with the TV.
8 - Disconnect the TV from power for 2 minutes, then when plugging it back in PRESS AND HOLD THE POWER BUTTON ON THE TV FOR 10 to 20 SECONDS to try and force the TV to reset.
9 - If after checking all these different issues, you may have a Faulty Power Supply Board, A Bad Capacitor on the Power Supply Board, Loose Wire Harness, or Loose Ribbon Connector in the TV itself.
10 - Most likely when a TV has the power light ON but NO PICTURE and NO SOUND, it is the Power Supply Board that has failed.

BTW, here are solutions for you to play iTunes movies on Samsung smart TV
1helpful
1answer

Sound but no picture or anything on the screen.

Ur LCD inverter backlight board is dead.Replaced this LCD inverter baclight board will get ur picture back.Tries Websites Shopjimmy.com,Ebay.com to buy a LCD inverter backlight board for the replacement.It a long board in shape.
0helpful
2answers

My samsung 40 inch lcd tv is not swiching on it just keeps making a clicking noise

HELLO, I AM ALMOST SURE THAT YOU HAVE BAD CAPACITORS ON THE POWER SUPPLY BOARD, IF YOU OPEN THE SET LOOK FOR THE SWOLLEN CAPS THAT IS A COMMON PROBLEM WITH THIS SAMSUNG LCD TVS
GOOD LUCK


[email protected]
0helpful
1answer

Digital - Weak or no signal digital coax when hdmi dvd player on

if u have placed your DVD next to your tv ... just maintain distance between then and check out
0helpful
1answer

Sony Bravia 46S2010 no picture only glows but, only sound on

sound like you had problem with the lcd display panel. The Tcon had problem that attack to the panel.
0helpful
1answer

No sound

Hi,I have samsung T.V. but nearly 2 OR 3 months we had a problem of no sound (It is an on and off trouble) .can you tell me about this?
Name-Om Prakash Pareek
Address-H-32 shastri nagar,jodhpur
phone -2641100
3helpful
1answer

Samsung lcd tv no picture just sound

While this is not a permanent solution, we've fond it helps... We have a Samsung LCD that does not turn on when there is too much humidity in the room. This only happens in the summer when it gets really humid. We moved our dehumidifier next to it, let it run for around 15 minutes and the TV turned on again, no problem. Lately, it's been raining alot so it's very humid. We've gotten into the habit of leaving our dehumidifier on through the night on low and we've had not issues turning on the tv since then. This is a hastle but it's either that or buying a new tv.
15helpful
2answers

Samsung LE40R73BD DTV freezing, wont chnage channel

i've just some digging around and found that you can access a service menu and perform a reset which sorted the issue for me.

Access the service menu by pressing, in order, whilst the tv is in stand-by mode:

info
menu
mute
power

when the tv comes back on you will have a service menu; select option 12 (reset) the tv will then switch off.

this will reset your TV back to factory defaults.

turn tv back on and you should be prompted to go through the plug and play setup again - go through everything and then all should start working OK (it did for me)

HTH
Not finding what you are looking for?

1,143 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...