My hp 630 laptop was working well but today when i turn it on, it will start but will remain at Press The ESC Key for Startup Menu and will not continue. What should i do.

Try using the F12 key instead of ESC.

Press the ESC key, and if you can't figure out what to do then consult a computer repair person.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

If the computer will boot into Windows, click Start , type recovery into the search field, and then select HP Recovery Manager from the list.
If the computer will not boot into Windows, turn on the computer and immediately press the esc key to display the Startup Menu, and then press the F11 key.

1- remove the battery, power on the laptop or
2- try another dc adaptor

When you turn on your computer, you do NOT have to enter the startup menu. Do not press any keys when it asks you to press the Esc key. Once that screen goes away, it will take a minute for Windows to boot up and your good to go.
Thanks for using FixYa.

if you have nothing wrong with the laptop and it start up normally , do nothing
it may have moved to a notice that will go after a few seconds (10)and then proceed to normal start up
if it doesn.t then on pressing the start button hold down the delete key and eventually the bios menu ( start up menu) will come up on the screen
you van make changes to the start up procedures her but be very careful as any changes may get you into bigger trouble that what you have now
if you get the lap top running normally( not touching the bios settings ) press icon in the bottom lh of the task bar( flag in the world ) and that brings up the programs
at the bottom of that list is a search bar
type in chkdsk and then enter and puts the laptop into a check of the disk operation
that operation will find , fix and place the registars in all of the correct positions for all programs , files , folders , photos etc on the disc and will take up to 6 hours to complete if the disc is operating correctly
If you have a mechanical problem with the disc , you will get that message and the only fix is a new hard drive

hi which one of these is yours ?
FL772AV, FQ866AV, FL774AV, FL773AV

ure your windows disk, boot with it.
boot into recovery console, type in your username and password then type in chkdsk /p

just run your recovery disc and follow the instruction,ok

You should have the option to press either f2 or f12 to go in to bios