How do you access stored radio stations on my gpx hm3817dtblk

Go here, download to PDF: Download manual In PDF Format, you can enlarge the print

I just located the manual online. You can find it at http://www.manualsearcher.com/gpx/hm3817dtblk/manual
No downloads needed. You can read it online if you like.

is a problem mechanic but this door is not automatic. open the atvio and is easy only look inside the radio.

sorry i think u had kept right pins on pannel but some times by the voltage prblms u need to change the pins in main system not in speakers try

The problem is the laser pickup, the laser over time becomes weak, the only option is clean the laser pickup lens with a Q-Tip and rubbing alcohol, if this fails! either the assembly needs to be replaced "very costly" or replace shelf system "much cheaper"

The manual:

http://www.retrevo.com/support/GPX-HM3817DT-manual/id/1183ag710/t/2/

Page 6>>>>

Setting the Clock
a. Press the STANDBY button until the unit is in standby mode.
• When the unit is in standby mode, the STANDBY button will be red.
b. Press the CLK ADJ. button. The time will begin to blink.
c. Press the HOUR and MINUTE buttons to adjust the hour and minute.
d. Press the CLK ADJ. button to set the adjusted time.
Setting the Alarm
a. Press the STANDBY button until the unit is in standby mode.
• When the unit is in standby mode, the STANDBY button will be red.
b. Press the ALARM SET button. The time will begin to blink.
c. Press the FUNCTION button to seleect CD, Radio, AUX, or Buzzer.
• For Buzzer mode, the display will not show any indication.
d. Press the HOUR and MINUTE buttons to adjust the hour and minute.
e. Press the ALARM SET button to set the adjusted alarm time.
• An alarm clock icon will appear on the LCD Display when the alarm is set.

How do you program FM stations on the old model GPX s7794 model. I do not have a remote. Thank you!

On the bottom of the removeable base, you will see 2 rectangular openings, and inside these openings is a tab, that you lift up (it will seem like you are going to break it, no, its designed this way) lift those up, then slide base out. (We just spent twenty minutes trying to force the base off, then son took a pair of scissors and did this, figuring, well, if it breaks, then it will just have to always be hung on the wall) Good luck.

You can store up to 10 channels. For channels 1-5:: Go to station you desire. Press MEM button. Press 1 button to store. Press MEM button again. Do the same for buttons 2,3,4,5 to store channels. After you store to buttons 1,2,3,4,5 then: For channels 6-10: Go to station you desire. Press MEM button. Press +5 button. Press 1 button to store. Press MEM button again. Do the same for buttons 2,3,4,5 to store channels.

You can get the manual at this link--you have to join but it's free and a very usefull site for finding manuals:
http://www.retrevo.com/s/GPX-HM3817DT-review-manual/id/1183ag710/t/1-2/
IF THIS SOLVES YOUR PROBLEM, PLEASE PLEASE RATE ME AS "FIXYA"!! THANKS!