Panasonic ak320 code for one for all remote - One For All Televison & Video

If you think that is bad...see what F62 will do.

Start checking audio aoutput settings.

Its broken....can't you see that?

That's because you haven't set the clock on the system. I jumps to DEMO mode once you turn it off without the clock set. Clock can be set through your remote. Hope this helps. Cheers.

The 6 ohm speaker would make it slightly louder but won't solve the problem, you are right the stereo has bad audio output ic, and there is trouble with the cd player. I would use it until it goes, and get a brand new unit, not cost effective to repair.

Read this procedure to possibly fix the remote:

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821

They also sell replacement remotes.

Look at your remote or zoom in on the picture of the original provided and get the actual model number.

In this case it's "n2qahb000045"


or check eBay: search for "(model of the device or the remote) remotes", check the 'include description' box. Usually cheaper than the vendors.

Right now there's one available for <$14 delivered...

http://cgi.ebay.com/Panasonic-Remote-N2QAHB000045-SAAK220-SAAK230-SAAK320-/300564870717?pt=LH_DefaultDomain_0&hash=item45fb0ff63d

Get a tech to look at it. Power spikes kill things.

Code For Model RCR311S Code 1003 for Panasonic TV Code 1054 for Panasonic TV Code 1062 for Panasonic TV Code 1109 for Panasonic TV Code 1170 for Panasonic TV Code 1248 for Panasonic TV GOOD LUCK THESE ARE THE CODES LISTED FOR YOUR REMOTE/

CD Spindle motor maybe at fault.

i suggest that you can connect a subwoofer through a Pionner's like power amp and adjust it only with lowpass filter... you need a battery and a charger. and that's it.