- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To me the Error is telling you
Probe Error - Wash - Power - Drain
CL & CLe Series Dishwasher Display Codes
Below are common codes that display on Hobart CL and Cle Series Dishwashers:
Door(s) Open - This displays if one or both doors are open. Close all inspection doors.
Clear Conveyor Jam - The code appears if there is a jam. Remove the rack from the machine. Then, press START and rerun the rack.
Probe Err - TANK - Check if the lower float assembly in the displayed tank isn't visibly damaged and that the proper amount of water is covering the lower float in the tank.
Probe Error - FnlRns - Make sure the supply water valve to the rinse booster is open.
if you've checked your manual's troubleshooting section and the solution for the issue isn't present, please call Hobart directly and ask them to send out or recommend a home technician. If they can't, then please schedule a diagnosis with home depot.
Please check that any rubber pipes that transport water are not blocked by any type of objects. You might look for bumps within the rubber pipping that would indicate this. Thank you.
×