At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go to service and and clear the error
Asterisk * press
then press 2 & 8(Two buttons single time)
Again press Asterisk *
COPIER>FUNCTION>CLEAR>ERR Then press ok an off the machine wait 1 minute and on the machine..
hi . that error indicate that the cleaner roll ( in the fixing unit )is over . maybe there is a sensor disconnected or misplaced. check That section and clear error from service mode copier / function / clear / err ok.
A E000061 is a drum potenal problem. It means the drum is not charged up correctly. It could be as simple as replacing the two post corona wires and cleaning the grid or making sure the primary charge unit is installed correctly. It may also, be a broking grid or corona wire > you may have to replaced the primary charge unit??? It could also be the drum potenal sensor or the DC controller or the drum..... I'd go for the simple stuff first and you can not clear the problem till the problem is fixed > Before I forget, you can also, turn the drum potenal off in service mode... It's just a band aid, it will not solve the problem..... Good Luck
×