At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Came to find out that two output ic (left channels had a short)had fried...changed them and the system was back to normalCame to find out that two output ic (left channels had a short)had fried...changed them and the system was back to normal
You can't post conmments that contain an email address.
Re: I have a boschman eqx-75 pro and all the left...
Guessing here but check the left/right balance pot is working properly and that the left side is not disconnected
if no one else answer , it will be off to a repair shop for a proper diagnosis and quote
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
75822 HANDHELD CB TRANSCEIVER User Manual G-300 owners guide Midland Radio ... Owner's Manual Model Number 75-822 Features Include: 40 CB Channels 10 ...
This is not a stereo microphone. There is no left channel. If you are recording into a stereo input, you need to split the input into two mono inputs, and record each channel as a mono track.
I use my Boshmann EQX-75PRO in the house and had an explosion which ended up with two capacitors of 16v 470microfarrads fried, now those have been fixed but there is no sound output at all... don't know what to look for... the electronics guys also cant figure it out... Can you help... Any idea???
This problems it pretty easy to fix.Just require take the tv apart.Resolders all the holes in the video board that connected to a long CRT tube neck.Should cost $50 -$75 more than that u are being cheated.
There are many things that could be causing your amp to clip. You could have a blown speaker or your ohm load could be too low for the channel on your amp (This is rarely occurs with highs, just subs) Check each speaker in your car with an ohm meter. They should ohm out to somewhere around 4 ohms. If they don't, the speaker is bad.
Came to find out that two output ic (left channels had a short)had fried...changed them and the system was back to normal
×