At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: We set the temp to 76 and it flips up to 85 why? We...
It may be a factory default setting. Once it loses power to the thermostat it defaults back to the factory setting and you have to reprogram it to your setpoints.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Karen, We are sorry to hear about your Oven. We are happy to look into your concerns but we will need your your address, phone number, the model and serial number, the website you were contacted on, Fixya, your review ID, and date of purchase to [email protected].
Sounds like the system is either over charged with freon or under sized. Call the same people back out ask for a supervisor to come out and check out the system any other company will charge you.
To manually operate the thermostat set the system to cool and fan to auto then press the HOLD button one time then release, you will see the hold word on the screen after that up the UP or DOWN arrows is setting the desired temperature.
will take a while at 76 also check fan in freezer section make sure not iced up and is working correctly the moisture from the warm air can cause the fan to ice up causing more problems
The 2 AC fsnd turns on when the Engine temperarure hot. It receives the signal from ECU throught the Engin temperature sensor ( Coolant). Your case happens since the Engine Temp sensor went bad. At beginning the temp sensor can not produce any resistance just like open then ECU thinking engine hot turns on the Fan. When your engine ia about 85, it is a normal temp then the sensor could produce some resistance matching the look up tabel for the ECU, then the ECU turn off the Fan. Some pepople has it run all the way since the wire contact to the sensor was off. Replace the Engin Temp sensor to take care of the problem.
You have 2 temp sensors on top engine, one for your temp read out, one for the fan purpose. If you don't know which one, wait for your temp at 85 and the fan is stopping, then unplug one, imediately the fan goes on, that the one. Good luck.
You said, your Oster wine refrig won't lower its temperature below 76 degrees. I
have it for about 5 months, and it worked fine all this time with a
setting of 50 degrees. Now it refuses to lower its temp. It reverts
back to 76 everytime. Can someone give me any ideas about what is
wrong? FYI Mine did not come with an owner's manual. Sounds like the Thermostat is bad. http://www.oster.com/CustService.aspx?content=manual The tel # in your Oster Manual is a recording and will not help you! But New appliances are under Factory warranty and are fixed or replaced no cost to the customer!you are under
the unit runs all the time because of the fan (ventilation motor)-but it is not working on cooling or heating all the time - The ventilation motor pushes the air from the room through the machine and when the termostat is reading that you set it up for cooler air or warm air it will turn on the air conditioning part or the heating part of the machine-it is very good system actually
×