Admiral designer series heavy duty giant capacity 20 lb dryer

Nice old style machine. I think the motor has a two speed control on those. Low speed does wash and high speed does spin. There is some help in this link.

https://www.google.com/search?q=WASHING+MACHINE+DOES+NOT+WORK+ON+SPIN+CYCLE

..

Check for a bad heater or thermostat.

Sounds like timer needs replacing

does the admiral aed4475tq have a reset button it will not turn on it is only 9 months old

Dryers not getting hot at all.

HI, this is a faulty inlet valve assembly. you should replace this failing component asap if possible.This will fix the issue.

The spin cycle should be on a timer,and shouldn't be able to change how long it spins.The same timer that controls all the cycles of your washer.Your pump may be trying to go out,and isn't removing the water fast enough.This will keep water in the tub,and the normal spin cycle isn't long enough to let the pump get the job done.Another problem might be a clog in your drain hose.Another problem could be the drain hose is set to high above the pump,and the pump can't push it up that high (shouldn't be a problem if you are using the hose that came with the washer,and not extending it with another hose or something.)

probably need the wheels and idler inspected



If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

pull the pulley toward the motor the belt goes to the outside of the pulley... let me know