PROPHETIC CHANNEL SETTINGS on Your DECODER(DSTV)
Step: 1 Press menu Select "Advanced Options" Select "Dish Installation" Enter the pin "9949"
Select "Network Configuration" Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!! Set Signal Setup to "Enabled" by selecting it, and moving left or right Set Frequency to "11170" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "3/4? Select "Accept these settings"
Step: 2 Select "Network 2 Setup" Set Signal Setup to "Enabled" Set Frequency to "12682" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2? Select "Accept these settings"
Step: 3 Select "Network 3 Setup" Set Signal Setup to "Enabled" Set Frequency to "12722" Set Symbol Rate to "26657 Set Polarization to "Vertical" Set FEC to "1/2? Select "Accept these settings"
Step: 4 "Accept these settings" to go back to the "Dish Installation" menu then Select "Scan All Networks" Your decoder will go into scanning mode and might take a while to scan all networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal.
ENJOY WATCHING PROPHETIC CHANNEL.
http://electronicshelponline.blogspot.com/
http://schematicscom.blogspot.com/
http://electrotechnician.blogspot.com/
16,175 views
Usually answered in minutes!
Hi we need help for DSTV HD model 5s
How to install Prophetic Channel -Prophet Shepherd Bushiri on DSTV Decoder (Public channels)
Step: 1 Press menu Select "Advanced Options"
Select "Dish Installation"
Enter the pin "9949" (If asked)
Select "Network 2" Set Signal Setup to "Other" by selecting it and by moving left or right,using arrows on your remote control.
Press "OK"
This appears: Satellite Name:IS20
Set Frequency to "12722"
Set Symbol Rate to "26657
Set Polarization to "Vertical"
Set FEC to "1/2"
Set Use NIT to "Yes"
Select "Accept all displayed values and leave screen"
IMPORTANT LAST STEP:
Go to Home Network and select "LNB High Frequency" and CHANGE it to "10600". Then press "Accept all displayed values and leave screen!!
Go to "Scan All Networks" ( It's just under Networks 1-6 settings screen,yes that one).
Well done!!!
Your life will never be the same again!
If you are struggling you may Email me on: [email protected]
×