Hello We have managed to lose the charger which plugs directly into the Logitech A-00006 wireless headphones and I am struggling to find a supplier for a replacement. Can anyone help please?

Hi Varghese, control the audio input connection cable on the transmitter, invert the input signals
The speaker or amplifier could also be wrong, inside the headset
Comment the results
Greetings Franco Dosil

Hola Varghese, controla el cable de conexi?n de entrada de audio en el transmisor, invierte las se?ales de entrada
Tambi?n podr?a estar mal el parlante o amplificador, dentro del auricular
Comenta los resultados
Saludos Franco Dosil

Most likely it's a programming thing but it could be you have a loose wire... Never no.. Mite try getting a cheap pair try to see if the same problem occurs.. Thanks good luck

Blinking green light is an indication the headset is trying to establist communications with the receiver (dongle). Sound issues are normally on the side where the microphone is, this is most commonly a broken wire. The speaker wires are very small diameter. This can be fixed by a competent soldering job with new wirest from PC board to speaker inside the headset.

some driver is not supported in windows 7 download new audio driver for wireless headphone so updated from website only ur headphone after this process should be working

Hi All,

I have a

are Logitech Model # A-00006 and the wireless antenna unit is Model # A-00007.

Recently I am noticing that what is normally a stereo experience of listening while I am in on a Beacon conference call is becoming a mono experience (only the right earphone). Not sure if this is because of bandwidth fluctuations or a problem with beacon or a problem with my headset, but it doesn't seem to do it when I'm in a 1:1 call.

Odd thing is I don't hear it cutting out when I am making a direct call - only when it's a multiparty Conf call.

Thank you inadvance,

B1L

~..~

The padding comes of easily, hook your finger under from the inside and push out gently. Once removed reviles 2 philips screws. Once they are removed you have to pry the 2 plastic disks that form the swiveling ear piece apart. Then you have access to the speaker, which is glued down with a still very sticky substance but will come up quite easilly, then remove the screw from directly under the center of the speaker, then you can pop off the swiveling earpiece that is on a kind of ball and socket joint, this took quite a bit of force. This is as far as i'm going as I now have access to the damaged part of the wire! And also the 4 screws mentioned in the original question. Hope this helps.

You can buy the charger at any computer stores in your place. Just ask for it and if the store you enter does not have that item, they can order that kind of charger from there supplier.

Hi, You might want to call the Logitech Customer Care, try on another computer, if the problem persist, then you should get a replacement for hardware failure. This is covered by warranty terms.
Thanks and have a nice day J -

You need to contact these people; http://www.logitech.com/index.cfm/contact/&cl=ru,ru Hope this helps :)