Where to look for a coil for a sachs dolmar 120 chain saw

Ignition Module Coil for Dolmar Maybe for your Country otherwise search by Makita also there are several equvalent parts to get forSachs Dolmar and its cheaper , beware on this to order ignition coils by mention on the serial motor number and the year of build by all orderings if it must be the right combination to get it can be important by marketing technical upgrades / modifications because of changed flywheels in several Dolmar models over past time i know. a suggested coil in a link

http://www.barrettsmallengine.com/partslist/dolmar995700071-11-1996.pdf - parts manual

air filter bolt to the face of the carby and most carbys are generic make
talk with your local mower , shop and get one that has the bolt holes in the same place or in such a position where you can drill new holes to fit it on

40:1 mix ratio.

you need to rebuild or replace the carb

2.6 ounces of oil per gallon of gas. Joe. here is a manual in case you don't have one. http://www.dolmarpowerproducts.com/downloads/373/DOLMAR_Catalog.pdf

Dealer locater
http://www.dolmar.com/

IPLs can be found here:
http://charlotte.preferredpower.com/DOLMAR/Browse.htm

Did you try NAPA? Take your screw with you.

Here is a dealer has always been good to me.
http://www.fastcutting.com/ HTH
Lou

Sachs Dolmar support is very difficult to find. Some of these gals and guys were dealers when these were first introduced. Please do an inquiry first and post your need where most applicable. There are many Dolmar threads.
ArboristSite.com Chainsaw thread (free to join)
http://www.arboristsite.com/forumdisplay.php?f=9
HTH
Lou
One of these guys has a rotary engine Sachs... pretty cool.

I am not familiar with your specific saw. That said on most saws, under the clutch cover, below the clutch is an adjustment for the oil pump.

This is a Husky:
http://weborder.husqvarna.com/order_static/doc/HOUS/HOUS2006/HOUS2006_1150183-95.pdf top right page 34 example,

On my Pioneer it is under a cap screw. HTH
Lou
You might also try here:
ArboristSite.com Chainsaw thread (free to join)
http://www.arboristsite.com/forumdisplay.php?f=9
This is a collection of professionals, amateurs, mechanics, and whole bunch of nuts. At least member has a rotary engine Sachs Dolmar.

This is a an old saw. I suggest you try here:
ArboristSite.com Chainsaw thread
http://www.arboristsite.com/forumdisplay.php?f=9
I did a search for "Sachs Dolmar Super 133" and got over 10 hits.
Please search the existing posts before asking your question, the answer may have been asked and answered. It is free to join if required. They are a collection of chainsaw enthusiasts and very helpful.
This guy is a Dolmar dealer and dealt with them for many years.
http://www.arboristsite.com/member.php?u=3404
Scott has an operational radial dolmar... pretty cool. GL
Lou

I think this answers your question fully. Please rate my answer.