My printer showing hcb bulb error 14002 - Zebra ZXP Series 8 Dual-Sided Card Printer

Dear Pattie Blackwell,

You can ask these guys for help, they are very educated in barcode technics, barcode printers and scanners. HU/DE/SK/EN:
https://www.digicode.hu
[email protected]

Thanks

Hello,
you need pc or watch tool-set (including mini-torx)
Stepps:
-on bottom there are rubber-parts, where it stands on: disconnect them (small cutter-knife)
-there are srews-torx turn them out
-then you can move top-cover with the loudspeaker and the display !! be careful there are very thin wires connecting top and bottom
-on bottom there is the board, connected with 2 screws (same torx-type) and a plastic-clip: turn them out and open the clip carefully
-side of power button pull out the board (have a look on wire)
-now you will see the batterie / accu type BST-37 900mAh (standard to many Sony-Ericsson handys) / can be taken out

...Good luck

( HCB 120, similar to HCB-100 HCB 100 )

i also have the same issue anybody got solution?

Pass code for HCB-30 is 0000. (On mine anyway)

Hi, you can download the HCB-100 user guide straight from the manufacturer here:

http://www.sonyericsson.com/cws/support/accessories/detailed/userguide/hcb-100?cc=gb&lc=en

Just click the Download link -- the file is a little over 2MB.

Not possible to do this on this radio......

I am having the exact same problem with my vauxhall corsa and my pioneer deh-6000ub its so annoying it works with the manufacture stereo soon as i connect my pioneer in it doesn't come alive (the HCB-400)

http://images.compusa.com/itemdetails/A180-14002/A180-14002-out7d-dw.jpg

Please rate my solution. Thank you.