WHAT TYPE OF RECTIFIER DO I NEED FOR A 1974 WHEELHORSE C120 TRACTOR

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.mywheelhorse.com/graphics/file/tractors/tr_1977_b-c-series_om_810001r1.pdf&ved=0ahUKEwihpMasurnTAhVCwmMKHU4SDCgQFgglMAE&usg=AFQjCNHrCykwV1a_3BR4nxXiCoeUONRKXQ&sig2=VZEyQRcm2AEz2S7jes4dzQ

Go to Toro/wheelhorse .com then select parts.

most small engine repair shops can get one --or order on line

Get the actual model and serial number from the tag under the seat and go to www.toro.com you will be able to find a parts diagram along with wiring information there.

If you need further help, reach me via phone at https://www.6ya.com/expert/john_73617967471ec7c4

Toro wheelhorse Demystification Electical wiring diagrams for all...

If you need further help, I’m available over the phone at https://www.6ya.com/expert/steve_f5a6ca85b5d1ffc9

Go here and put in your Model and serial number of the tag under the seat and you can dowload a Owners Manual. https://lookup3.toro.com/request/request.cfm

Jump onto www.toro.com and download the free service manual for your machine. Note down all the details on the ID plate on the mower, you will need it to find the correct manual. Pretty sure you will find it there.

Jump onto www.toro.com and download the free service manual for your machine. Note down all the details on the ID plate on the mower, you will need it to find the correct manual...... should be one there.

I assume you have a Kohler engine and a standard original Wheel Horse wiring.It sounds as though either your solenoid is defective, or the solenoid has a bad earth. If you have current arriving at the positive side of the solenoid from the key when in cranking position and you're sure the solenoid is grounding properly then it's the solenoid itself. As a check you could flash the solenoid and your motor should crank: MAKE SURE THE MOWER IS IN NEUTRAL AND BLADES DISENGAGED. This will prove that the starter motor is good. It's then a matter of replacing the solenoid...a straightforward bolt job, please disconnect the battery as a grounding flash when refitting the solenoid could cause generator failure.

simple go to outdoorpowerequipment.com and enter make and model and you can download or print it in pdf form