Dowsing dvr 264 been working fine, just got no video on screen record lights in red are on no picture ?

kkmoon 8 ch DVR with 1TB WHEN I POWER IT ON THE START UP SCREEN (KKMOON) COME UP ON THE SCREEN AND THEN WHEN IT GO'S OFF NOTHING. RED POWER LIGHT IS ON DVR AND IN A FEW MINS BLUE RECORD LIGHT COMES ON BUT NOTHING ON THE SCREEN. ALL CAMRA'S HAVE THE MOTION LIGHTS ARE ON SO THEY ARE GETTING POWER AND WHEN THE dvr COMES ON IT BEEPS FOR THE CAMRA'S.

Are you using hdmi if so plug it in a VGA adaptor it should get a picture you have changed the aspect ratio to hd put it back to 720 or lower

make sure that the DVR system is PAL and the resolution is 720p

the dvr may be full need to delete some of the stuff on it..

how to reset dvr 264, if I forgot the password

Debra Beuthling-Gentry,

I would be happy to provide more information on this, though I just need a bit more information. It sounds like the receiver is in dual mode since both lights are on. What exactly is happening on the second TV? Is it a blank screen with no picture, or is there a message that pops up? If it's a blank screen with no picture, try putting the TV itself on Ch. 60 or 73 and see if anything changes.

Tommy Faust
DISH Social Media Representative

My DVR box is powered up but, i get no picture and the HDD red light is flashinG

My Direct TV has no sound or picture but does show channel info at the top. Any help is appreciated.

intermintence in vertical IC deflection its a job for experienced tech need to look for that circuit and do fine job resolding that IC